| Author | Message | ||
     Midknyte |
http://web.archive.org/web/20081208141626/http://w ww.cjnetworks.com/~westtek/ShocBroc.htm anyone have one of these laying around? | ||
| Normthenomad |
Have one. Need to find stock mount for my M2 before taking it off. If you can be patient I'll be taking this one off next week, doing a shock swap and waiting for new shock to arrive. | ||
| Midknyte |
It's just cool finding one - happy to wait Are you ridng with it now? Any issues bottoming out? | ||
| Xbpete |
I have a stock shock mount for a 16.5 on a 2000 X1,, think it might work ,,, xbpete at gmail.com if either of yas need it,,, | ||
| Normthenomad |
Midknyte, ride everyday, live in Az going back to stock height 'cause I tend to drag boot sole through turns. You have to remind yourself to be careful w/speed bumps and dropoff with curbs etc. but no bottoming out haven't scratched bottom of shock but did grind through one muffler clamp screw while riding Charleston Rd between Tombstone & Sierra Vista. Maybe a little more preload? | ||
| Buelldualsport |
Has anyone used the M2 L mount on an X1/S3? Found one locally on Craig's List. Sorry, don't mean to hi jack the thread. | ||
| Midknyte |
Norm, Messaging seems to still be on the fritz. Catch me in email - midknyte at somewareonthe.net | ||
| Bikerrides |
I use a m2 low shock and mount on my s3 and love it! | ||
| Xbpete |
FYI, I sent out the longer mount to Norm today Pete | ||
| Buelldualsport |
Bikerrides Mail have you | ||
| Charlies_s1 |
Quick question, Did Westec have problems with the aluminum lowering mount?? I see in the link above they state it is made of steel. I have an aluminum one I plan on using on my build and just need to know, Thanks for your thoughts, Chuck. | ||
| Midknyte |
Norm' Checking in... Did you get it swapped out yet? | ||
| Midknyte |
* Bump * Does anyone else have one? | ||
| Joe7bros |
I have an S2-T that I would like to lower 1.5-2 inches. I measured the shock a while ago; if I remember correctly, it was approx 16.5 inches eye to eye installed. I gather there are several front shock mounts that may "push" the shock back toward the swingarm, thus lowering the rear of the bike. Any assistance would be appreciated. Thanks | ||
| Midknyte |
So. Here's what I'm learning. The west Tek mount was for the older, longer shock. I'm pretty sure that I have the newer, shorter shock (2002 with all recalls done), so essentially I already have an equivalent mount. Carry on. I'm not looking for this anymore. (Message edited by midknyte on August 28, 2015) |
