Author |
Message |
Jrobey7
| Posted on Friday, January 02, 2015 - 01:54 pm: |
|
I'm building 2 good bikes from 3 bad ones. Naturally there are some spare parts accumulating... For now it's a 12 motor on the chopping block: 12 Crank pistons & Cylinders Cams and cam cover Primary cover 03-05 (small shift shaft) Primary cover 06+ (large shift shaft) Clutches & primary drive Perfect engine Cases Bad trans for parts? I have to get it apart but I know something was bad in there Anyone want to convert 9 to 12? I can hook you up with all the parts you need. |
Jrobey7
| Posted on Saturday, January 03, 2015 - 06:55 pm: |
|
Got it apart today, motors very clean. It was not wrecked. Here's what I'd like: 12 Crank (it's good) $300 Cams & cover (no damage) $125 Heads $400 (studs broke off, I have to pull them out but every other set I've sold went for $400-500) Pistons & cylinders $125 (still see the cross hatching & there's no major rub marks on the pistons) Clean Cases 04 $150 Primary covers $150 Clutch & primary $100 Stator $75 Rockers & covers $80 PCV valves are good working order. |
Jrobey7
| Posted on Tuesday, January 06, 2015 - 01:38 pm: |
|
Trans is good minus the shift drum, make offers. It's 03-05 straight cut |
Phelan
| Posted on Tuesday, January 06, 2015 - 02:04 pm: |
|
Hit up my boss Dan, he's looking for an '05-'07 12 crank. 9705323344 |
Jrobey7
| Posted on Tuesday, January 06, 2015 - 02:38 pm: |
|
You work there? Nice! I heard he was looking, thanks for the heads up. I think it's 06/07 he's looking for. I have 04 which should be the same as 05. But he knows more than I do. My crank, pistons, intakes and 12ecm are pending sale to upgrade a bad rod bearing XB9 into a XB12. I'll give him a shout if something falls through. |
Phelan
| Posted on Tuesday, January 06, 2015 - 09:00 pm: |
|
Thanks, yeah I started here in September; moved from Amarillo to Fort Collins (shop is 18 mi south). My wife and I were wanting to move to Colorado anyway after being in Texas so long (14 years for me, 6 for my wife) and she graduated with her Masters in August, so the timing was right. (Message edited by phelan on January 06, 2015) |
Jrobey7
| Posted on Wednesday, January 21, 2015 - 07:09 pm: |
|
Tons of XB parts for sale, just ask & make an offer |
|