| Author | Message | ||
     S1owner |
Bought this from another BWB dont need it $50 plus the ride to the 48 Note the one bolt hole usps droped it should be fine    | ||
| Ltbuell |
..the hole in question looks like where the alignment sleeve fits into it...just sayin'.... | ||
| Screamer |
Is there damage to the gasket surface above the front intake cam bushing - or is it just the photo? Thanks | ||
| S1owner |
Just the photo only damage is where it was dropped it was well packaged just hit that corner | ||
| Phelan |
You'll want to post the P/N stamping as well. Using a 91-99 cover on a 00-02 or vice versa will cut off oiling of two cams. | ||
| Stev0 |
That's an 00-02 cover and you can use it on previous models Phelan. I ran one of them on my 98 for a few years. You have to be careful with gaskets tho. | ||
| S1owner |
  | ||
| S1owner |
      |
