G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Drhutch81 Posted on Saturday, August 02, 2014 - 03:19 pm:        I need a set of 2" drop pegs for a Ulysses. Knights Design, Precision Engineering, or similar.   Rbuck53 Posted on Sunday, August 03, 2014 - 08:53 pm:        I have a set of black, Knight Designs, SideTrax, 2", drop pegs for the Uly which are brand new and have never been mounted or used in any way. Paid $134.95 + $15.00 shipping. Will take $125.00(PayPal add 3%)shipping included. Let me know if you are interested or want pics. Thx. Rich   Xtrmbkr Posted on Tuesday, August 05, 2014 - 09:40 am:        These sound like what I need. Would I also have to drop the clutch and brake levers 2" after installing the 2" drop pegs?   Rbuck53 Posted on Tuesday, August 05, 2014 - 11:17 am:        Yes...for safety reasons you should lower the control levers too. To adjust the shift lever to a lower position, simply rotate the barrel adjuster between the uniball joints. For the brake lever, back out the clevis on the adjuster screw. You're done in a few minutes! These pegs are still available.   Rbuck53 Posted on Tuesday, August 12, 2014 - 07:38 pm:        I've had a few PM's with questions about these Knight Designs, 2" drop pegs fitting XB's other than the Ulysses. From what I have found out, these pegs will fit other XB's...but need to be spaced with washers or spacers. However, OEM XB pegs will not fit a Ulysses. If anybody has other information please let us know. Thx.   Tbowdre Posted on Thursday, August 21, 2014 - 11:56 pm:        Uly and 1125 are the same... XB mounting space is a little bigger... So going from XB to 1125/uly take a small amout of material away. I have not tried uly/1125 to XB but simply shiming with a washer would probably work   Rbuck53 Posted on Friday, August 22, 2014 - 06:22 am:        Thanks for the reply. It is not readily apparent to me but I am sure there was a ligit reason why Buell decided to make the Uly peg mount different than the rest of the XB line. I feel confident however that there is no harm in fitting the Uly peg to any other XB frame as long as the peg is spaced properly in the mount as you suggested. Thanks again!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: