Author |
Message |
Koz5150
| Posted on Tuesday, May 13, 2014 - 01:43 pm: |
|
Here are pics from on my bike and when I bought it a few years ago. I will pull it down from the rafters tonight and take a few more pics. I was going to place this on my M2 and when I mocked it up I believed it could fit without cutting the frame. Some bracketing will have to be fabricated. $150 + $25 for shipping. Email me ken.koszewa@me.com
------------------------------------------------------------------------- From the AirTech Website
BS1GP2 - $246.75 Buell S1 Lightning - GP tail section only The GP tail section is sold seperately. It fits onto the S1 chassis and utilizes the stock S1 upholstery. This tail section will fit on S2, S3 and M2's with a little framework (shortening subframe), but you must use the stock S1 upholstery. This tail section will not work with a Corbin seat. http://www.airtech-streamlining.com/buell/S11996-98.htm (Message edited by koz5150 on May 13, 2014) (Message edited by koz5150 on May 13, 2014) |
Facing_reality
| Posted on Tuesday, May 13, 2014 - 06:38 pm: |
|
I sent you an email... |
Koz5150
| Posted on Wednesday, May 14, 2014 - 09:52 am: |
|
I pulled the piece down from my garage rafters last night for some more pics and info. FULL DISCLOSURE 1. There are 6 small holes on the top where they mounted a lap timer 2. The center mount has some cracks and will need some work. 3. The front right has a small crack 4. There was a small tab on the bottom right I removed to fit it on my M2.
|
Koz5150
| Posted on Wednesday, May 14, 2014 - 01:07 pm: |
|
Sold! |
|