Author |
Message |
Bikerrides
| Posted on Monday, May 05, 2014 - 11:04 am: |
|
Just bought a 95 S2 and the PO cut all the wiring connectors off behind the fairing/dash and replaced w/wire crimps while making a café racer out of it. I'm going to need either the plugs (male and female) so I can rewire them or replace the harnesses altogether. Let me know what you have and I'll go from there. (Message edited by bikerrides on May 06, 2014) |
Phelan
| Posted on Tuesday, May 06, 2014 - 11:16 am: |
|
I actually should have at least one, maybe both sides of one of the plugs, but I'll have to clean out my office to find them. |
Bikerrides
| Posted on Wednesday, May 07, 2014 - 07:58 am: |
|
Ross, That would be great! Let me know if you find it. Stacey |
Phelan
| Posted on Wednesday, May 07, 2014 - 09:36 am: |
|
Will do |
Bikerrides
| Posted on Saturday, May 10, 2014 - 08:25 pm: |
|
Ross, I have sent you a PM. Stacey |
Phelan
| Posted on Sunday, May 11, 2014 - 03:46 pm: |
|
Stacey, I haven't been getting PMs. Please email me direct at phelan_z06@hotmail.com. Thanks |
Bikerrides
| Posted on Sunday, May 11, 2014 - 11:01 pm: |
|
You get my message? |
Joe7bros
| Posted on Friday, July 31, 2015 - 07:56 pm: |
|
Hello everyone. I know this is an old post, but I have a similar problem. Bike is a '96 S2-T. PO rewired handlebar controls, headlight, warning lights, turn signals, tach, etc; they all work, but he used the same color wire for everything! So, is the wiring for the controls, lights, etc part of the main harness; is the harness available? Are the controls separate sub harnesses; are they available? Would Sportster harnesses work? Thanks for your help. |
|