Author |
Message |
Smoke4ndmears
| Posted on Saturday, April 05, 2014 - 05:33 pm: |
|
Everything* you need to go erect, plus more!: Headlight Headlight Fairing 1125CR Upper Triple Tree 1125CR Lower Triple Tree 1125CR Handlebar Clamp 1125CR Highbar Kit (Handlebar, clutch and throttle cables) 1125CR Gauge Plastic Shroud 1125CR/Firebolt Ignition/Seat Lock/Gas Cap and key 1125CR Mirrors (unused but bullet connectors snipped off) Aftermarket Mirrors with LED signals built in/ Bolts for handlebar clamp and ignition included (didn't come with any of this when sourced) DDM tuning H7 HID kit *Unopened!* -not pictured- $700 shipped to the contiguous 48. Nothing going separate. *I got the OEM mirrors thinking I could mount them on the posts of the nissin daytona calipers I run, but alas the only really mount on the OE 1125CR master cylinders. There are replacement control clamps all over ebay that will allow you to mount them as pictured below. Here's the stuff (gas cap and HID kit not pictured). Board software is being a PITA so here is a direct link: http://smg.photobucket.com/user/estavokalossi/library/1125CR%20Parts (Message edited by smoke4ndmears on April 05, 2014) |
Smoke4ndmears
| Posted on Monday, April 07, 2014 - 06:27 pm: |
|
|
Archnemesis
| Posted on Tuesday, April 08, 2014 - 12:19 am: |
|
VERY Interested. PM Sent |
Smoke4ndmears
| Posted on Tuesday, April 08, 2014 - 07:33 am: |
|
PM replied. |
Smoke4ndmears
| Posted on Tuesday, April 08, 2014 - 03:51 pm: |
|
All sold with the exception of the OEM CR mirrors. |
|