| Author | Message | ||
     Rsm688 |
NEW Buell OEM rear chrome pulley bolts (still in wrapper) $30 shipped NEW OEM Buell Rear shock- SOLD Custom Billet front and rear footpegs (4 total), super nice, $70 shipped FRAME,SEAT, and TITLE (sold together): the subframe was shortened 6”, my buddy who is a professional fabricator/machinist custom built a CNC rear plate designed for the taillight and to align perfectly with the Ducati seat, holes for the wires and mounting bolts were machined in and welded on, I removed the steering lock (its pointless and notorious for leaking water into head bearings) and has it welded up and ground perfectly flush, I cut off the mounts for the electronics on the right side lower rail of the subframe where they are mounted for the factory (factory tail hides them, they were exposed with the ducati seat) and spent hours slowly dremeling and sanding them until it is 100% flush and looks like it came from the factory that way (cleans the rear end up a ton and looks awesome), he also welded in a plate in the center, this is where the electronics (ECM/relays) now will mount 100% hidden under the seat. The frame was then shipped out to be custom powder coated by one of the best in Candy Apple Red (seems to change color with the light from lighter to darker red and has a metallic/anodizied look to it, pictures do NO justice for how awesome it came out). I have $800 in the custom machining/CNC work, powder coating, and seat not to mention the cost of the frame and title. $295 plus shipping SWINGARM: Perfect condition and was just sent out to the same powdercoater and powder coated in matte black. It has never even been outside since the fresh powdercoat. $120 shipped Black ceramic coated header, great shape, no dents/dings, includes exhaust flanges- $115 shipped HID headlight kit with ignitor, harness, etc., missing bulb they are $9 online in whatever color you like- $30 shipped Perfect condition OEM Buell Black Rear Wheel/pulley/rotor/tire with 500 miles- $200 shipped Rear Wheel/tire alone- $150 shipped Rear Wheel pulley- $50 shipped Rear Wheel brake rotor (low miles)- $50 shipped Handlebar controls (ignition/turn signal, starter switch)- $60 shipped for both sides Throttle cable/throttle return cable (both)- OEM, like new (I replaced the old ones with a new set when I got the bike)- $35 shipped Oil tank and lines- $35 shipped Ignition/gas cap with 2 keys- $90 shipped Factory service manual- $30 shipped PARTS BOX- this will include all the original bolts and screws I removed from my bike, coil, ignitor, clutch perch/switch/wiring, kickstand spring, carb mounting bracket, top motor mount bracket, all motor mounts (the tie rod end looking ones that are round on both ends), rear axle , rear axle sliders, plug wires, battery clamp, old tail light, pair of original pegs, swing arm block (the part between the swingarm and motor) and hardware, the electric sensor that attaches to the carb, an assortment of brand new carb jets, and various other small parts. This will be every single part I have left other than the bigger parts listed separately above. $170 shipped for it all Frame/seat on eBay with pictures: http://www.ebay.com/itm/331103054656?ssPageName=ST RK:MESELX:IT&_trksid=p3984.m1555.l2649 Heres pictures of the rest:       } (Message edited by rsm688 on January 10, 2014) | ||
| Rsm688 |
       | ||
| Rsm688 |
    A lot of the parts are dusty from sitting for a while like the wheel and header, they are in great shape but don't look as great in the pictures because I didnt take the tipe to wipe them down with a rag. Thanks, Spencer | ||
| Pikeben08 |
What size is the rear shock? | ||
| Rsm688 |
Sorry ben I received payment on the shock/bracket a few hours ago from someone on another forum. | ||
| Terser |
Thanks for offering up the parts on this forum. I have received the rear brake and it looks great. Can't wait to get it on my Buell to replace the bad one. | ||
| Dammitquikgentry |
Pm sent | ||
| Rsm688 |
Great glad it made it there Terser, glad to see these parts go to fellow badwebbers! Gentry, PM replied to | ||
| Kalali |
May be I missed it but are these X1 parts, particularly the swing arm and the header. Thanks. | ||
| Rsm688 |
Header and HID kit are SOLD. Kalalii, the swing arm is for the newer M2 and the X1s. It will fit any tube frame Buell but this is the exact one that every X1 comes with. Spencer | ||
| Kmbuell |
Spencer, I'll take the foot pegs if they are still available. Check your pm's. Thanks, Kevin kmbuell | ||
| Bikerrides |
Are the pulley bolts truly chrome or satin silver? Bought a "chrome" Buell pulley cover that was actually satin silver. Looks nice, but am changing to a chrome one next time I change my rear tire and would like to go with chrome bolts to match. | ||
| Roderick |
If the swingarm is still available, I will take it. Roderick | ||
| Rmckenz85 |
I sent you payment for the header on paypal i also sent you an email with the address for you to mail it to. Thanks | ||
| Rsm688 |
Header and Billet pegs sold. Roderick, the swingarm is yours, PM sent. Bikerrides, they are actually chrome. I can see my reflection in them through the wrapping Thanks, Spencer | ||
| Roderick |
Swingarm is Paypal-ed. Roderick | ||
| Gianni312 |
Spencer, I haven't heard from you. I sent you paypal payment this past Monday but haven't heard from you in re shipping info on the parts I purchased from you. I emailed you 3 times to no avail. Please contact me. Giovanni.a.raimondi@gmail.com | ||
| Rmckenz85 |
Do you have a tracking number for the header you shipped me? | ||
| Rsm688 |
I emailed both of you, I've been away from the computer for a few days. Both packages should be delivered today via UPS ground. Here's what I have left: FRAME,SEAT, and TITLE (sold together): the subframe was shortened 6”, my buddy who is a professional fabricator/machinist custom built a CNC rear plate designed for the taillight and to align perfectly with the Ducati seat, holes for the wires and mounting bolts were machined in and welded on, I removed the steering lock (its pointless and notorious for leaking water into head bearings) and has it welded up and ground perfectly flush, I cut off the mounts for the electronics on the right side lower rail of the subframe where they are mounted for the factory (factory tail hides them, they were exposed with the ducati seat) and spent hours slowly dremeling and sanding them until it is 100% flush and looks like it came from the factory that way (cleans the rear end up a ton and looks awesome), he also welded in a plate in the center, this is where the electronics (ECM/relays) now will mount 100% hidden under the seat. The frame was then shipped out to be custom powder coated by one of the best in Candy Apple Red (seems to change color with the light from lighter to darker red and has a metallic/anodizied look to it, pictures do NO justice for how awesome it came out). I have $800 in the custom machining/CNC work, powder coating, and seat not to mention the cost of the frame and title. $250 plus shipping Perfect condition OEM Buell Black Rear Wheel/pulley/rotor/tire with 500 miles- $200 shipped Rear Wheel/tire alone- $150 shipped Rear Wheel pulley- $50 shipped Rear Wheel brake rotor (low miles)- $50 shipped Oil tank and lines- $35 shipped |
