| Author | Message | ||
     Buelliedan |
Dan8888, You do realize that you have to replace the whole S1 tail section not just the seat right? | ||
| Nascar_tom |
Frame, Wiring Harness and Wheel have been spoken for by Happy Bueller's Thanks | ||
| Vindigni714 |
Jerry, Will the Pipes fit a 96' S1? Johnny V | ||
| Jerry_haughton |
Johnny, it wouldn't be a direct swap. the front of an S1 muffler wraps around the front of the engine to meet the collector, for starters, so you'd need a muffler to go with the pipes above to make it work, plus the bend of the rear pipe is different between S2 and S1 where it comes over the frame rail. not sure the diameter on '96 S1 pipe, but the S2 pipe is 2". | ||
| Vindigni714 |
Jerry, Thanks for the info. JV | ||
| Vindigni714 |
Bueller's, Still have a Load of stuff to offer. Buell Black, Sz. Med Helmet: $125.00 (Clean/used) Buell/Vanson Black Leather/Suede Bomber Jacket Sz. Med.:$200.00 (Never worn) Full Carbon Rear Fender for Steel swingarmed Buells: $125.00(no light kit) (4) Small/Rubber foot pegs(used/Clean): $20.00 Screamin'Eagle Aluminum Air Can Insert (for wide holed can) $20.00 (says"S1 Lightning" on it) Air cleaner Backplate (used) for "Buell" Race air can(near holes type can): $25.00         | ||
| Vindigni714 |
Hay Gang, I'm open for trades or best offers on all the above stuff. It's all clean and will work out shipping if at all possible. Johnny V | ||
| Dan8888 |
That's funny, Thanks for the advice sandblast, but I have another 2 seater. And Buelliedan, I am aware that the single seat requires the shorter tail section, I have both. The short one is a bit scuffed up though, Does anyone have advice as to whether I should have it painted or just find a used one in better condition. | ||
| Jerry_haughton |
The S2 Thunderbolt pipes and seat listed above have been sold. thanks to all who expressed interest. (Message edited by jerry_haughton on August 19, 2004) | ||
| Stfdik1 |
Hey Buell Heads, i am new to the site and have a set of Benke Shifters and Break Levers for a M2, S2 or S3 bike. I own an S1 and bought them off EBAY and was told they fit my bike, but they don't. They are slightly used but in great shape. I would like to get what I paid for them, which is $273.00. the retails for $372.00 + tax + shipping. Look forward to hearing from you. You can call me @510-776-4737 or email me. check out the link: http://www.bankeperformance.com/buell/shifters.html (Message edited by stfdik1 on August 18, 2004) | ||
| Vindigni714 |
The foot pegs and Air Can Insert are gone. Hope to hear from ya'll soon. I can use the bread to get some stuff I really need. I almost bought that shifter Set!!!!!!!! Wish the Shifter stuff fit man, What a bummer!!!!!! Thanks, Johnny V | ||
| Loki |
Looking for a home. 1997 Lightning heads(front and rear), 20k miles on them. 1997 cylinders from same. Wanting to turn these to speed up repairs on my S1. Ping me: s1loki@comcast.net | ||
| Henrik |
Jerry; are you parting out the Blurr??? Say it ain't so. Henrik | ||
| Snake |
For Sale: 48MM Mikuni Carb. Yes a 48MM not 45MM... Used for only 600mi. Standard finish. I still have the box and paper work it came with. Works GREAT! $400.00 and I'll pick up ship'n in the 48 states. Ping me with questions.} | ||
| Jerry_haughton |
'96 S2 Thunderbolt parts for sale, basically everything except engine, including: brand-new updated rear shock and bracket, never installed. SOLD   brand-new updated swingarm, never installed, $175 obo.  original low bars, excellent condition, SOLD (the tall "touring" bars are SOLD), and polished front 6-piston PM caliper, $95 obo.   VERY meticulously polished (not chromed) stainless steel header, GORGEOUS piece, $125 obo.  sideplates, some mild hand-machining with file/sandpaper, in good condition, $175 obo.   highly-polished external-disc SuperTrapp, complete assemby, $90 obo. the WP 4054 ROMA forks (with trees) have been SOLD. ping (address in profile) with questions and/or reasonable offers. think the prices are too high? never hurts to make an offer. all prices are plus shipping. (Message edited by jerry_haughton on August 26, 2004) | ||
| Jespo_m2 |
Full Force exhaust system (header and muffler), with heat shield, street baffle, and updated mounting bracket. Fits: Buell '95 thru '98 | S-1 S-2 S-1W M-2 S-3 S-3T . In excellent condition. No ding, no dents. Silver (chrome - like) Ceramic coating in great shape. NOTE: S-2's require changing air filter to a Forcewinder to clear rear headpipe on Race pipe. This setup new costs $674.90 (with baffle). Selling for $375 + shipping http://www.useforce.com/shop_buell_exhaustsys.html Boxed and ready to go: Shipping Info: zip = 01702 12" x 28" x 24" 22 lbs   | ||
| Black9 |
Teknic, Lighting boots, sz10 yellow/black, wore half dozen times 75.00 XB12 stock can, great for Drummer conversion 65.00 Buell tailbag for xb "s" never used 50.00, buyer pays shipping on all. email in profile, thanks. | ||
| Josh_ |
Can a moderator throw some CR,LF on Vindigni714's post please. (delete me as needed) | ||
| Vindigni714 |
Admin, Did I do something wrong? I don't know what CR or LF means. If I've done anything wrong I will correct it as soon as I find out what it is. I thought I have played by the rules as I have been posted many times and been in contact with many Buellers that have been very kind and helpfull to me. Clueless, Johnny V | ||
| Jerry_haughton |
Johnny, you've done nothing "wrong", no worries. when you post pix, stack the commands like THIS: image{bike} image{bike} image{bike} as opposed to THIS: image{bike}image{bike}image{bike} that way the pix format in a fashion more favorable to scrolling up and down as opposed to right to left. i'd fix it but i can't, and the post is too old now for you to fix via the "edit" icon. maybe one of the moderators could take a second to reformat your post? best regards and ride to lean, Ferris |
