Author |
Message |
Lynrd
| Posted on Monday, June 10, 2013 - 10:00 am: |
|
I am sure you need to clean your garage, and I am here to help. I need a set of cases , jugs and heads. Condition not important and I really would prefer unusable stuff (Scored barrels, primary chain grenade victims please apply). However, all mounting holes need to be intact and unscrewed up, particularly the mounting holes on the front head. What do you have?? You can hit me at xcdx AT att DOT net or via a PM here. |
Lynrd
| Posted on Monday, June 10, 2013 - 10:07 am: |
|
Oh - crap - should have mentioned - seeking earlier sportster stuff , not any of the Rotax parts or XB. And I PROMISE, I am NOT building stupid chopper rigid frames! |
Buellish
| Posted on Monday, June 10, 2013 - 01:25 pm: |
|
I have a set of X1 barrels that came off 20,000 mile bike that had the big end bearing go bad.They don't look too bad and would clean up with a light honing and some black paint.I would take $60 plus shipping. http://s1120.photobucket.com/user/buellish1/librar y/Boots/Barrels |
Buellish
| Posted on Monday, June 10, 2013 - 01:31 pm: |
|
I also have three sets of rocker covers,the old three piece Sportster style. |
Buellish
| Posted on Monday, June 10, 2013 - 03:42 pm: |
|
I've got a set of pushrods and pushrod tubes as well.Sorry for the multiple posts but I forgot I had some of this stuff. |
Lynrd
| Posted on Monday, June 10, 2013 - 05:41 pm: |
|
Thanks for the follow up. I am NOT building a working engine from the junk - just need something for mock up and to build some tooling off...so pushrods would only add weight, and I already have rocker boxes. I am interested in the jugs tho...can you figure out freight to 95126?? |
Buellish
| Posted on Monday, June 10, 2013 - 06:46 pm: |
|
It looks like $19 via Priority Mail which includes insurance. |
Lynrd
| Posted on Monday, June 10, 2013 - 09:59 pm: |
|
BOOM! Sold! still looking for some cases that will never see the street again...IF they had the cylinder studs intact, that would be awesome! |
|