| Author | Message | ||
     Buellish |
Prices include shipping unless otherwise noted. X1 side stand $20 X1 front forks.Some damage to the clear coat where the headlight clamps touched.No triple trees $145 X1 intake manifold w/injectors $50 Complete clutch includes basket,hub used plates,pressure plate,spring plate and bearings,works good $150 Clutch ramp $20 Clutch adjuster w/release plate $30 2 sets of rocker covers.Need polish $25 ea. S1 rear master cylinder w/reservoir $25 Set of 3 tie bars $35 Front brake lever $25 S1 rear brake lever $35 Rotor for charging system $60 Upper motor mount $25 X1 coil $30 S1 horn $15 S1 regulator $30 X1 seat $75 Reflectors removed from S1.As new.Good for restoration $20 Derby cover,needs a polish $20 X1 rear axle w/spacer,adjuster plates,washer and nut $55 S1 rear axle w/spacer,lock washer and nut $35 Front Goodrich braided hose $30 Rear white wheel with powder coat removed from rim about 1 1/4" in,some scratches,needs a polish $125 plus shipping X1 oil tank $30 S1 front pully cover and drive support arm $30 Swing arm mounting block $30 EBC FA 249 HH front pads.Fit all tubers except PM calipers. $25 | ||
| Emptimind |
Curious if your rocker covers are the newer XB ones, or the older ones? | ||
| Buellish |
They are the older type. | ||
| Buellish |
The X1 intake manifold w/injectors is sold. |
