| Author | Message | ||
     Rsm688 |
Okay guys I am running out of room in my shop and need to get these parts out of my way. I am doing a complete custom build on my 99 M2 with 9k miles on it. All parts unless otherwise stated are in excellent condition. The bike has been garaged its entire life and never seen a drop of rain or dirt. Make me an offer on what you want, bundle parts for a better price: showa front forks $95 upper and lower triple trees (including handlebar mounts/bolts) $70 headlight brackets $25 headlight/housing (factor bulb and HID bulb) $65 molten orange flyscreen (not a scratch anywhere) $40 flyscreen brackets $15 complete front brake setup from the lever/master cylinder all the way down to the caliper (got new pads 500 miles ago)$95 perfect condition front wheel with Continental tire with lots of mileage left and the rotor was replaced 500 miles ago (the new style upgraded one) $150 molten orange front fender (not a scratch anywhere) $40 dash with speedo $45 handlebars $40 brake and clutch lever $20 ignition module $75 plug wires $10 heat shield (has one very minor crack) $5 flasher relay $5 headlight bulb $1 lower belt guard $10 front pulley cover and brace (the brace i sanded down til it was all smooth and not rough lookin from the factory, I then painted the center area where the buell lettering is, then I sanded down the whole flat area to a nice brushed stainless looking finish. It looks awesome with the depressed area black and the outside and buell lettering silver, really makes the letters stand out and looks a hundred times better than it came from the factory) $30 factory horn $15 factory rear turn signals (one of the lenses has a crack) $10 some really nice grips that have plastic outter and inner pieces that were painted to match the molten orange paint $10 side stand switch (the one that wont let you drive if the side stand is down) $5 front engine mount (in perfect condition, I am replacing it with a billet one, its the newer M2/X1 mount that has the provision for the extra tie rod) $75 steering head lock $5 perfect shape tuber wiring harness off my 99 M2. When I removed it I used painters tape and wrote on each wire what it connects to so that it is a no brainer to hook the harness back up to the bike. I am doing some relocation of electronics and all and have another harness I am going to cut up and modify. Perfect shape and already labeled for you $75 Tuber ignition module in perfect shape $75 All parts are located in Jackson, MS but will ship wherever. Pics available. Always open to trades as well. Thanks, Spencer (Message edited by rsm688 on January 22, 2013) | ||
| Rsm688 |
Also have: front and rear isolators in great shape no tears/splits, free with any purchase Rear pulley mounting hardware (the bolts/washers to mount the pulley to the rear wheel, i replaced mine with chromed ones) $5 heat shield (has small crack near one of the mounting holes), free with any purchase (that requires a package big enough to fit the heat shield without costing me extra postage) CV40 jets (I have an assortment of brain new jets for the factory carb) $10 factory M2 seat, overall in good condition, has 2 small blemishes (can send pics), otherwise looks great. $40 plus shipping Complete factory shifter assembly (full setup, has been polished and looks very nice, shifter/tie rod/linkage bar/etc.) $35 Factory rear brake pedal lever (has been polished and looks nice) $20 (Message edited by rsm688 on January 22, 2013) (Message edited by rsm688 on January 23, 2013) | ||
| Jag1046 |
I am interested in the forks, Shifter front fender, Brake pedal and would like a pic of the seat.. pm or e-mail me jag1046@hotmail.com me a complete cost with shipping to 89883 Thanks John | ||
| Kmbuell |
Price with shipping on the bars to 27012. Thanks, Kevin | ||
| Firstbuell |
I'm definitely in for the wiring harness & clutch lever [perch & cut-off switch as well?] also interested in front brake system, rear turns & sidestand switch | ||
| Rsm688 |
Pm's sent | ||
| Brinnutz |
I'll take the flyscreen brackets. | ||
| Rsm688 |
All messages replied to. I am going to go through and add some prices, if you dont like the price make me an offer Thanks, Spencer | ||
| Ratbuell |
Interested in the front brake and the jets. | ||
| Rsm688 |
Handlebars are sold. | ||
| Charlies_s1 |
Sorry bad post. (Message edited by Charlies_s1 on January 24, 2013) | ||
| Rsm688 |
Starting to list these parts on ebay, feel free to bid or make me an offer on them http://www.ebay.com/sch/rsm688/m.html?item=3308638 24933&fits=Make%3ABuell%7CModel%3AM2&pt=Motorcycle s_Parts_Accessories&hash=item4d09055025&vxp=mtr&rt =nc&_trksid=p2047675.l2562 Thanks, Spencer | ||
| Spiess |
I would be very interested in the headlight bucket. It's one of the last pieces I need to complete my bike. Send me a message here or at thespiessman@gmail.com Thanks Rich | ||
| Analbeard |
That is a Prolite front disc and an expensive item . | ||
| Rsm688 |
Thanks for the heads up it came with my bike in the package and I didn't know it was anything different than the stock one. Gonna list it and the wheel/tire separately. Message sent rich. Thanks, Spencer | ||
| Spiess |
Spencer, I sent a couple of replys to your email and didn't hear back. If you did't get my emails let me know. Thanks again | ||
| Rsm688 |
Spiess, I got your email and sent you a reply and never heard anything back. I dont want to part the headlight out, I am going to sell it as a complete unit only. Handlebars, Flyscreen, Front Rotor- SOLD Thanks, Spencer (Message edited by rsm688 on January 31, 2013) | ||
| Kmbuell |
Spencer, Did the bars ship yet? Heven't seen them yet. Just checking. Thanks, Kevin | ||
| 99cyclone |
Are the rear turn signals still available? I could use them for my S1. | ||
| Rsm688 |
Yes Ive still got them, I could do them for like $14 shipped if you want them Kevin, PM SENT Thanks, Spencer | ||
| Spiess |
My emails must not be going through, can you send me a pic of the back of the headlight, I will buy it if its the right one | ||
| Rsm688 |
Yes I can it will be Friday until I can get a picture as the bike and all the parts are in my shop at my parents house and I am a few hours away in school thanks, spencer | ||
| Spiess |
Spencer, how much do you want for the whole headlight? | ||
| Rsm688 |
$65 plus shipping | ||
| Rsm688 |
Forks, Flyscreen/brackets, Seat, Pulley Cover, Dash/Speedo, are SOLD | ||
| Twowheeldream |
I am interested in the side stand switch if it is still available. | ||
| Trouble_enabler |
Spencer, I have not received the front rotor yet, did you manage to get this shipped out? Thanks Mike | ||
| Rsm688 |
Mike, if it hasnt gotten there yet it should be there today or tomorrow at the latest, let me know once you get it. Thanks, Spencer | ||
| Trouble_enabler |
I did not receive my rotor. Do you have a tracking number you can provide me? Please send it to mdove315@gmail.com Thanks Mike | ||
| Kmbuell |
Spencer, Have the handle bars shipped yet? Haven't gotten here. Do you have a tracking # or ship date? Kevin | ||
| Trouble_enabler |
Can you tell me how you shipped it and provided tracking info? FedEx? UPS? USPS? Do you give it to a guy who knows a guy? What's the deal? | ||
| Trouble_enabler |
Rotor arrived today  | ||
| Twowheeldream |
Just wondering if there is any word on the sidestand switch... I paid back on the 14th, haven't seen the part yet. |
