| Author | Message | ||
     Rsm688 |
Well I have a lot of small parts I no longer need, So I am putting them into a bulk group: Front and rear isolators and bolts (in good shape, no tears anywhere) Factory turn signal relay Factory headlight bulb Tuber heat shield (has a small crack at the hole for the lower mounting bolt, can easily be filled in and painted and look perfect) Large assortment of factory bolts/screws (I replaced lots of them with stainless bolts that I'm polishing) Tuber steering lock and set screw Handful of well nuts (the ones used where the seat mounts to the subframe and where the hugger mounts to the swingarm) CV40 main jets (brand new, have 2 or 3 of the most common sizes used to rejet with, swapped to a mikuni carb before i got to use them) Polished stainless isolator snap in frame plugs (that cover up the holes in the frame where the isolator bolts are) Also have the steering head and swing arm bearings (minus the races) I can include if anyone has a use for them (if not I'm gonna toss them) $35 shipped for it all Thanks, Spencer |
