Author |
Message |
Spike240sx
| Posted on Monday, June 20, 2011 - 11:18 pm: |
|
Ok so I am parting out my 05 XB12R.... Again. My laptop crashed and I have not been able to complete any transactions. I apologize to those who tried making a deal. SO here we go. This will be posted on many forums. To make it easier for me to keep track of who wants what and sales, I am making some guidlines. I will not deviate from these guidlines. So please do as follows to make an offer or to even ask questions. 1) DO NOT PM ME! Some forums are too hard to keep track of conversations. 2) DO NOT PM ME! I will tell you to email me anyway. LOL 3) Email me at X1MotoWerks@Gmail.com Please include real name and board name 4) Paypal will be the only form of payment accepted. Buyer must add the %4 service charge that paypal charges. 5) Shipping is the responsibility of the buyer. I will try to get an accurate quote as soon as possible for those who need it. 6) Please give me at least 24 hours to ship a part out. About the bike Bought it early this year Has 42k On her according to the title. Bike was in good running condition. The shift drum went out on me about 500 miles into this season. I completely tore down the bike with the intentions of replacing all bearings and seals. Was also going to have it completely re powder coated. Got to the point of sand blasting the frame and discovered a crack at the steering head. The bike and engine is completely disassembled. The frame will not be available for sale due to the crack. Id like to keep the wheels for my 1125R but a reasonable offer may be considered. All other parts will be sold. Some info on parts: Blue Plastics- Used in decent shape, No Cracks. No Chin Fairing and Seat Cowel Gold Wheels-Peeling as usual, Rear is dead straight, Front has a 3mm run out and noticeable scratch on lip Forks rebuilt with new seals, guides and bushings and AmsOil Medium Weight Seats in good Condition. Swing arm in good condition. Engine parts in good condition. Jugs still have cross hatching and pistons still have anti friction coating. Rear head is not for sale due to damage. Jardine GP1 Exhaust-Freshly Rebuilt, Do not have chin fairing mounts Brand New 2nd Gen Headlights Please Email me with any questions and offers. No Reasonable offer will be refused. Thanks (Message edited by spike240sx on June 20, 2011) |
Froggy
| Posted on Monday, June 20, 2011 - 11:32 pm: |
|
I'll email you regarding the following (stole from the last thread )
- Front fairing (not available according to old thread?)
- Fairing stay
- Windscreen
- Headlights
- Mirrors
- Triple trees
- Anything else related (I am doing a conversion from Lightning)
- Rear turn signals
|
Greg_e
| Posted on Monday, June 20, 2011 - 11:52 pm: |
|
OK, I sent an email, hope it makes it to you. I'd weld the frame and reseal it if it was me. (Message edited by Greg_E on June 20, 2011) |
Mcelhaney14
| Posted on Tuesday, June 21, 2011 - 12:07 am: |
|
E-mail sent for the points cover. |
Spike240sx
| Posted on Tuesday, June 21, 2011 - 01:24 am: |
|
Emails replied to. thanks guys! |
Crackhead
| Posted on Tuesday, June 21, 2011 - 08:53 am: |
|
Email sent about front head cylinder head, rocker box, oil pump, and rear turn signals (oem?) |
Spike240sx
| Posted on Tuesday, June 21, 2011 - 02:00 pm: |
|
SOLD Points cover Forks-pending payment Header Jardine GP1-pending payment Tripple trees-pending payment 1125 Rear Signals-pending payment Lots of emails. All been replied to. Thanks Guys (Message edited by spike240sx on June 21, 2011) |
Lpd22
| Posted on Tuesday, June 21, 2011 - 05:08 pm: |
|
Just emailed you |
Spike240sx
| Posted on Tuesday, June 21, 2011 - 11:08 pm: |
|
Updated Sold List Points Cover Triple trees 1125 turn signals Header Jardine GP1 Forks-Pending Payment Plenty of parts left! Make me a good offer. |
Spike240sx
| Posted on Tuesday, June 21, 2011 - 11:28 pm: |
|
Some parts and prices. Rear pulley-$75 Front Pulley-$45 Front rotor-$85 Handle bars-$15 Each Primary cover with inspection plates-$150 Stock Cams-$40 Headlights-$150 (Brand New! 2nd gen style with mounting brackets) Stock ECM-$125 Throttle Cables-$20 Front Seat-$50 Fairing stay-$150(New) Clear Windshield-$40 Mirrors-$20 Shifter assembly-$30(minus adjuster) Foot Pegs-$10 Each(rider only) Control Switch Assemblies-$30 Each Speed Sensor-$35 Instrument Cluster-$125(approx 15k on it) Cylinder Heads-Comes disassembled, Will need valve guides pressed in Front-$50 (needs repaired and valve guides) Rear-$175(excellent condition, will need new valve guides pressed in) Rocker Boxes-$50 each(comes disassembled) Bare Engine Case-$250(perfect condition, completely cleaned) Crank with rods-$75(no play in rod bearings) Trans Gears-$100(2nd gear shows very minor wear under magnifying glass) Jugs with pistons-$50 each Clutch basket Assembly-$150 Lifters-$40(all) Pushrods-$25(all) Pushrod covers-$20 each Starter-$100 Stator-$30(has gold plated bullet connectors instead of plastic connector) Oil Pump-$40(gear in good shape) More Prices to come (Message edited by spike240sx on June 22, 2011) |
Spike240sx
| Posted on Wednesday, June 22, 2011 - 09:38 pm: |
|
Pic Album Of Parts. Parts you see may be sold. Ill try to remove that pic if possible. http://s47.photobucket.com/albums/f173/spike240sx/ 05%20XB%20Part%20Out%20pics/?albumview=slideshow |
Spike240sx
| Posted on Thursday, June 23, 2011 - 09:26 pm: |
|
Emails replied to. Thanks guys! |
Spike240sx
| Posted on Sunday, June 26, 2011 - 09:44 pm: |
|
Trying hard to catch up on emails from this weekend. Will hopefully have them all replied to by the end of tonight or early morning. Thanks for your patience guys. |
Nillaice
| Posted on Sunday, June 26, 2011 - 10:18 pm: |
|
email sent about teh clutch pack (i don't need the basket, just hte friction plates and speed sensor (Message edited by nillaice on June 26, 2011) |
Spike240sx
| Posted on Thursday, June 30, 2011 - 01:46 am: |
|
Current sold list. All other parts for sale still. Please email me at x1motowerks@gmail.com SOLD Points cover Tripple Trees Header Jardine GP1 Forks Front Head Front Rocker box Oil Pump Rear Turn Signals Shifter Assembly Crank Shaft Assembly |
Spike240sx
| Posted on Thursday, June 30, 2011 - 02:42 am: |
|
Sorry guys about some of the late replies. Had a family emergency that sent me out of town for a few days. All is well now and all emails have been replied to as of the time of this post. Thanks again guys! Buellers are the best! |
Littlebuggles
| Posted on Monday, July 04, 2011 - 02:39 am: |
|
Nick I'm interested in the the front and rear jugs, from the pics they seemed okay(?) Hope everything is okay. I've found those disks, there's only three of them, I'll mail them out to you Tuesday morning. |
Littlebuggles
| Posted on Wednesday, July 06, 2011 - 04:38 pm: |
|
Email sent regarding the jugs and pistons |
Tbolt_pilot
| Posted on Wednesday, July 06, 2011 - 09:33 pm: |
|
HAAA! I love that airbox! Great idea. If you don't want to sell the frame for rebuild, maybe somebody would be interested in making a coffee table out of it. |
Daschunk
| Posted on Friday, July 08, 2011 - 01:45 pm: |
|
email send about rider pegs (L and R) |
Captcaz
| Posted on Sunday, July 10, 2011 - 01:00 pm: |
|
Email sent about the front pulley |
Crackhead
| Posted on Monday, July 11, 2011 - 09:18 am: |
|
Nick, Did you mail out the parts yet? |