| Author | Message | ||
     Ceejay |
I'm pretty close to being done-but have little time, little money, I'm having another knee surgery, and moving so reluctantly I'm getting rid of it. Whole bike for 3500, pictured below. I was rearended in Nov of 2008 by a little old lady in a honda. Had 14,xxx miles on her and ran very well before I decided to make it a track bike, but due to life and curveballs I haven't gotten around to it. Been more of an art project since. Items below are described as best as possible, listed at what I believe to be fair prices, and buyer will pay all shipping. The bike still sits completely all together, so it will take time to disassemble if it doesn't sell as a whole. Title is free and clear/clean, not salvage. Any questions please ask, and if you'd like to discuss something shoot an e-mail and we can chat on the phone. Pics available upon request. Reasonable offers entertained. Frame with pucks-$300 with title $400 Forks-Buell race springs with Race Tech oil-$200 Swingarm-2007-small scratch on left side by axle-$50 Motor-no mods-$1200 Wheels with Pirelli Diablo(1000miles)Rear has ding but still holding air, includes rotors-$200 for the pair-$125 each Rear sprocket-stock, black-$50 Rear brake assembly(caliper, pads, line, MC, and pedal)-$50 Front brake assembly(caliper, pads-2brand new in box sets, MC)-$50 Pazzo racing shorty levers-clutch has a scratched up knob, all black-$75 pr. Wood craft split clip-ons with bars-black, bars light scratch up from installation include traction grips-$75 1125 race fairing-fiberglass unpainted, has primer, ends cut to fit clip-ons-$50 1125 fairing stay-$50 original fender-yellow-$20 Elka Rear shock-sprung for 220 lb rider never ridden but installed-$500 Carbonfiber ram air box-XBRR type-$325 wiring harness-uncut with fuses-$20 stock ecm-unmodified-$20 X1 Tach-$10 top triple clamp-bar clamps removed, still needs polished properly, no key hole either, $20 Pit bull stand-$50 Micron exhaust-excellent shape, new clamp bolting assemblies-$800 race suit-heine gerick tribal black/white/silver size 48-snug fit for 6' 205-never worn other than to try it on-$500 low S seat-small tear in corner can't be seen when installed, no hand strap-$25  | ||
| Gunner |
If it doesn't sell complete, I'd like dibs on the fairing stay. Thanks | ||
| Leoallafila |
PM for Pitbull stand! | ||
| Tonehd |
PM sent on wheels! | ||
| Prowler |
I'd be thrilled to take the stock ECM off your hands if you decide to part out this bike..... | ||
| Ceejay |
Here's a pic for all you righties...  Found a few more things, Vortex rear sprockets, 520 pitch, 52t and 54t, Al color-never used/installed. $50 each. PBI front sprocket-520 pitch, 23t, never used-I'll have to check on the tooth count memory not so good on that one-$15 520 RK chain-never used/broken-$50 I'm sure I'll find more when I start going through it all. | ||
| Reepicheep |
Hope the knee surgery goes OK CeeJay. Healing sucks, but beats the alternative. | ||
| Ceejay |
Thanks Reep! This will be second go around, so it should go better right?  | ||
| Evil_hd |
Second surgery? If at first you don't succeed... PM'd you for the forks (and lower triple clamp if available). Thanks! | ||
| 80rs427 |
I'd be interested in your harness and swingarm / rear axle if you decide to part it.... | ||
| Ceejay |
PM's replied to, thanks! | ||
| Ceejay |
Folks that have paid for stuff-It'll be going out tomorrow, I'll send tracking #'s. Thanks! Found a quite a few more things, I'll get an updated list together, with pics. | ||
| Warsaw1776 |
Interested in header if its available. | ||
| Warsaw1776 |
And top tripple clamps....can u email me at kaoneill@cox.net I don't check here too often | ||
| Ceejay |
the header is a Micron full Ti unit-well I think the actual muffler is SS, but nonetheless they are a package deal as one needs the other. The top triple has had the bar clamps and the key holder removed via endmill-should polish up nicely but not really a stock item any more and would require clipons or some modifications. let me know if your still interested. | ||
| Warsaw1776 |
i would love the full system but 800 is way out of my price range, even if i sold my current race for a couple hundred. as for the triple clamp i've been thinking about doing clip ons but would prob need the ignition hole. o well, if you feel like dropping the price of the exhaust for a poor bueller let me know, hahaha, jk | ||
| Ridesinnm |
I would like the yellow front fender. Brad. | ||
| Augustus74 |
Did the forks sell? | ||
| Ceejay |
Forks sold. updated list-pics available upon request. Most stuff has bolts necessary mounting equipment included. Reasonable offers entertained. If you don't see it, ask I might have it. Frame(3.5 gal)-300, 400 with title swingarm-50 motor(984)-1200 wheels(white with polished lip, tires, and rotors)-200 pr. 125 each rear pulley(black 65t)-50 rear brake assy-50 front brake assy-50 EBC Double H pads(formula SB110M) new in package-4 sets-25 each 75 for all. woodcraft split clip ons-75 pazzo short levers-75 1125 race fairing -50 elka shock-500 wiring harness-20 X1 tach-10 top triple-20 pit-bull stand-50 Micron-800 race suit-500 low S seat-20 r rider's seat(bolt holes wallowed/broken)-20 Vortex chain sprockets-50 each PBI front sprocket(21t)-20 chain-50 clutch cable(3,000 miles)-35 throttle cables-20 pr switch gear r and left-20 each voltage reg-35 LSL pegs with mounts-65 tensioner pulleys(two wheels, two brackets-one has elongated hole for tension adjustment) also have a wheel for chain-50 bucks for stock type, 25 for elongated, chain wheel-5 bucks. ECM download cable-never used-35 peg drops from frame-50pr. 30 for one rear wheel bearings(new in box)-25 headset bearings(new in package)-25 kickstand(full assy)-35 | ||
| Tom_k |
PM sent | ||
| Ceejay |
also have an 05 buell firebolt repair manual-got some greasy fingerprints and few notes in it-30 bucks. | ||
| Ceejay |
oil cooler with lines-30 Buell peg mounts(the drops from the frame)-20 each 30 for the pair rear motor mount-10 new in the box oil filter for XB9-3 | ||
| Gunner |
Corey, Got the fairing stay today... perfect. Thanks again | ||
| Prowler |
Corey, ECM arrived yesterday, Thanks much, been looking for one for a while. | ||
| Ceejay |
updated list of what's left updated list-pics available upon request. Most stuff has bolts necessary mounting equipment included. Reasonable offers entertained. If you don't see it, ask I might have it. wheels(white with polished lip, tires, and LSL pegs (silver, race legal) with adapaters-75 rotors)-200 pr. 125 each rear pulley(black 65t)-50 rear brake assy-50 front brake assy-50 EBC Double H pads(formula SB110M) new in package-4 sets-25 each 75 for all. woodcraft split clip ons-75 pazzo short levers-75 1125 race fairing -50 elka shock-500 X1 tach-10 top triple-20 pit-bull stand-50 race suit-500 low S seat-20 r rider's seat(bolt holes wallowed/broken)-20 Vortex chain sprockets-50 each PBI front sprocket(21t)-20 chain-50 clutch cable(3,000 miles)-35 throttle cables-20 pr switch gear r and left-20 each voltage reg-35 LSL pegs with mounts-65 tensioner pulleys(two wheels, two brackets-one has elongated hole for tension adjustment) also have a wheel for chain-50 bucks for stock type, 25 for elongated, chain wheel-5 bucks. ECM download cable-never used-35 peg drops from frame-50pr. 30 for one rear wheel bearings(new in box)-25 kickstand(full assy)-35 | ||
| Andymnelson |
Throttle cables originally from an "R" model? If they happen to be "S" cables, I'm interested! | ||
| Jersey_thunder |
Vortex chain sprockets-50 each PBI front sprocket(21t)-20 tensioner pulleys(two wheels, two brackets-one has elongated hole for tension adjustment) also have a wheel for chain-50 dibs pm sent (Message edited by jersey_thunder on May 19, 2011) | ||
| Hybridmomentspass |
vortex sprockets - what tooth? | ||
| Ceejay |
Andy-cables were from an r-sold regardless. JT-stuff will be on it's way Monday Hybrid-JT beat you to it. I'm starting a new post of what's left, same header with a few pics as there isn't much. | ||
| Captcaz |
Any chance you have a front sprocket ... need one for my '03 upgrade. |
