G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Rattrod30 Posted on Monday, May 23, 2011 - 09:35 pm:        S3 taillight for my 98 . Need all parts as every piece was "customized" by PO.   Ratbuell Posted on Tuesday, May 24, 2011 - 01:28 am:        If nobody has one used, you should be able to get them new still.   Ratbuell Posted on Wednesday, May 25, 2011 - 12:05 am:        not mine, but... http://cgi.ebay.com/ebaymotors/1999-BUELL-S3-THUND ERBOLT-TAILLIGHT-REAR-STOP-LIGHT-_W0QQcmdZViewItem QQhashZitem336815008cQQitemZ220789538956QQptZMotor cyclesQ5fPartsQ5fAccessories   Rattrod30 Posted on Wednesday, May 25, 2011 - 10:02 pm:        Thanks for the replies . I will have to check on the price of a new one . Mine looks near perfect after installed.The reflector ,bulb socket piece and lens "posts" have all been crudely cut or have parts broken off . All original fasteners are gone as is the gasket. It's cobbled on there pretty fair so I can be patient for a nice unit and/or the right deal. I was kinda hoping someone going to the Homecoming might have one so I had a good excuse to ditch work and ride over there   Ratbuell Posted on Thursday, May 26, 2011 - 12:24 am:        If it looks good when installed, you can do what I did. I took out the factory screws and drilled the backside of the housing, where the screw 'tubes' are. I drilled the fiberglass tail section behind the taillight, too. I went to Home Depot and got two looong skinny bolts, that would fit through the holes in the lens. I ran them all the way through the light housing and the bodywork, and secured them with nylock nuts. Now, it'll be a pain in the ass to take off...but since I put the LED board from a Ulysses taillight in there, I'll never have to replace a light bulb again either (all this was on my S2; same light though) But...go to Homecoming anyway. I can't make it. Go for me   S1owner Posted on Sunday, July 10, 2011 - 05:41 pm:        Do not know if your still looking I have the rear tail light, turn signals and mount from a 96 s1 if it will work

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: