| Author | Message | ||
     80rs427 |
I've got a few parts that could be used on a tuber and a street fighter headlight that was mounted on a '05 Firebolt. Kerker muffler, 2" inlet, 18" overall length, 3-1/2" dia body. A few scuffs but in very good shape with no rattles. $35 includes a second rough one if wanted.    Screamin' eagle air cleaner setup with washable K&N filter. No outer cover, includes breather lines and breather bolts. $35    K&N air filter No. KA120, 2-1/2" inside, 3-1/2" outside, 5-1/4" long. Came on my '98 S1 fitted to the breadbox elbow. $15  Street fighter headlight assembly. Never had it mounted to my bike. Includes mounting brackets and wires/plug for Buell XB. $40    Email with any questions. All items plus shipping. Thanks.... | ||
| Louisiana_xrider |
i like and am interested in the fairing, is this something you made or is it a factory made part? looks good from the front, but the back seems a little hacked from what i can tell in the pics. can you tell me a little about it | ||
| 4traxx |
Is there a chance you could hold that headlight up near the front of the bike . so I could get some perspective . | ||
| 80rs427 |
The fairing, lights, and fork mounts are factory parts, but the box in the rear seems to be adapted by the PO. Here are a few pictures of it mounted up to my '03 Firebolt project bike.    | ||
| Ratbuell |
Do you have any hangars for the Kerker(s)? 2" straight inlet looks like it's made for an S2...how's it sound? Blatty, crackly, or deep? Interested.... | ||
| 80rs427 |
Joe, I haven't heard the pipe but it looks like a nice straight through design with a louvered core. It is really solid with no rattles. I also thought it would work nicely on an S2. I don't have any mounting hardware for it. | ||
| Spiderman13 |
I'll take the streetfighter headlight. I'm near houston tx. | ||
| 80rs427 |
The headlight is sold pending payment to Spiderman13. Everything else is still available. | ||
| Matrim |
will the cleaner fit an fi x1? | ||
| 80rs427 |
Matrim, I think the cleaner would fit an X1...it is made to fit a CV carb and I believe they have the same bolt pattern. If you intend to use the vent line, the spacing on the vents is 6" and a Tuber spacing is 5-1/4" so a piece of the vent line would need to be removed to get the proper spacing and a piece of hose used to reconnect them. You also might need a spacer behind the housing for frame clearance?? | ||
| 80rs427 |
Headlight is sold and is shipping tomorrow....thanks Jerry. All the other items are still available. | ||
| Ratbuell |
I just posted in the "muffler wanted" thread too...but I'll take the kerkers. Am I reading it right and its $35 for the pair? That, I can afford these days. I'm still jonesin' over that XB cage but just don't have any spare cash right now... I'll send ya a PM in a sec. | ||
| 80rs427 |
Joe, I'll get you a picture of the second muffler and I'll check shipping and get back to you tomorrow. Thanks | ||
| 80rs427 |
Joe, email sent with pictures of the second muffler and shipping. The air cleaner is sold to Williep13 pending payment. |
