G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Littlebuggles Posted on Thursday, March 10, 2011 - 07:31 pm:        Black Yahama brand lift. Tabs fit the bottom of your forks, good for wheel removal for tire changes. Very convenient for washing as well. $60 or best offer. I gotta go find a box...   Littlebuggles Posted on Monday, March 14, 2011 - 12:38 pm:        Is the price too much? Someone make me an offer, I need to get a head stock lift so I can service my forks. No way to hang the bike since my garage is finished...   Pfnork Posted on Monday, March 14, 2011 - 02:19 pm:        Will it work on a 1125R?   Littlebuggles Posted on Tuesday, March 15, 2011 - 12:11 am:        I have no idea actually. I can measure the distance between the pins, I have X1 forks, you can compare that to your 1125's. Also feel the bottom of the fork leg, there should be a hole down there that the pin fits into.   Littlebuggles Posted on Tuesday, March 15, 2011 - 12:11 am:        The Juicer, PM returned.   Littlebuggles Posted on Tuesday, March 15, 2011 - 07:27 pm:        Pins are 7 5/8" apart, center to center. They are approximately 3/8" in diameter.   Whitetrashxb Posted on Wednesday, March 16, 2011 - 12:35 pm:        so then this would fit an S1?   Littlebuggles Posted on Thursday, March 17, 2011 - 01:23 am:        To be exact, if your S1 forks match the measurements above then yes. Generally speaking, I believe the WP forks are pretty close to the Showa's, but, I don't know if it's got the hole for the tab at the bottom. It's easy for your to check though, and I think it's a fairly common part of many fork's casting, seems like it would be anyway.   Kalali Posted on Thursday, March 17, 2011 - 12:52 pm:        "I need to get a head stock lift" That's exactly what I've been looking for my X1. Would you be kind enough to post what you find? Thanks, and good luck with the sale.   Littlebuggles Posted on Friday, March 18, 2011 - 03:28 am:        Yes, and thank you. I think I'll post this in the local paper or something.   Rho_138 Posted on Saturday, March 19, 2011 - 09:24 pm:        Will this fit an XB9r?   Littlebuggles Posted on Saturday, March 19, 2011 - 10:52 pm:        Yes, just checked it against my XB.   Rho_138 Posted on Sunday, March 20, 2011 - 03:37 am:        I'll say 60 with shipping if you can wait til Thursday for my cash to clear the bank   Littlebuggles Posted on Sunday, March 20, 2011 - 10:29 am:        Thursday will give me time to change my front tire and still find a box for this thing, I had one I thought was big enough, but I was wrong. So that's perfect. Let me know if something comes up.   Rho_138 Posted on Monday, March 21, 2011 - 11:49 pm:        Hey man, sorry about that, meant to say 60 dollars that of which includes shipping, unless it's outrageous then I'll pay half, let me know.   Littlebuggles Posted on Tuesday, March 22, 2011 - 12:57 am:        Thanks for clarifying, I wasn't quite sure what your last post meant. I found a box that's pretty close to the size of the lift. I may be able to trim it a bit to cut shipping. What's your zip and I'll see how cheap we can get shipping?   Rho_138 Posted on Tuesday, March 22, 2011 - 11:58 am:        19963 is my Zip, let me know   Littlebuggles Posted on Thursday, March 24, 2011 - 11:52 am:        UPS Ground $20.87 for 8lbs, SLC, UT to Milford, DE. USPS Parcel Post $25.51 for 8lbs, 30x15x18. Have you priced these with Dennis Kirk or Chaparral? Not sure what they'd charge for shipping, that's why I ask. I want my price to be good enough for me to off-set cost of the new one, but also good enough to be worth buying it used, you know? Maybe $70 shipped UPS so we share shipping?   Littlebuggles Posted on Thursday, March 24, 2011 - 12:28 pm:        If it seems impractical, I got a call today from my local listing, I asked him to hold on until we figured this out. What I found for my replacement (a headstock lift) is at Cycle Gear, I plan to buy that locally, they've been pretty good to me there. There's a location in Bear, DE listed in the back of my most recent catalog from them if that's a help to you. Discount ramps dot com sells front and rear kits starting at 79, the kicker is the s+h charge of $35. Found them in my Sport Rider magazine. Kalali, are you getting these updates? -Mike   Littlebuggles Posted on Friday, March 25, 2011 - 12:15 am:        Still waiting to hear from you Evan... Nice tank protector   Snp304 Posted on Friday, March 25, 2011 - 10:57 am:        for the head stock lift, I bought the stand from discountramps.com http://www.discountramps.com/motorcycle-race-stand .htm actually I bought the rear swingarm stand also, they worked with combining shipping, couldnt be any happier with them.   Rho_138 Posted on Friday, March 25, 2011 - 06:23 pm:        Hey sorry, Been working since yesterday morning so I haven't been around a computer at all. And you can hit up you're local guy I don't want to cost you on s+h thanks though man.   Littlebuggles Posted on Saturday, March 26, 2011 - 02:51 pm:        Still for sale. Local dude was a TOTAL flake. Or tool if that describes it better for the kids out there. Grrrrr.   Kalali Posted on Sunday, March 27, 2011 - 08:26 am:        "Kalali, are you getting these updates?" Yes sir. Thanks.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: