| Author | Message | ||
     S1joel |
I really don’t want to do this, but apparently Uncle Sam has better uses for my money than I do. Therefore I’m selling my 1997 Buell S1. Its undergoing restoration and needs to be finished. It is almost complete. It rolls and has most parts installed. It needs the brakes finished and a bit of wiring hooked back up. It will need oil added and the primary chain tension adjusted, but other than that it should fire up easily. It ran great when I disassembled it. I had the frame and most small parts powder coated flat black. The rims were powder coated bright red. The engine has less than 9000 miles on it. The rear swing arm is from a 2001 X1 and has had all the fender mounting points ground smooth. It comes with the following parts. 1997 Buell S1 with clear title Extra set of red rims (bearings removed but included) Extra brake disks, front and rear 2001 X1 swingarm installed Buell brand carbon fiber tail Buell brand carbon fiber heat shield Buell brand carbon fiber air cleaner American Sport Bike carbon fiber front fender Unknown brand carbon fiber windscreen Black tale section Black windscreen Red windscreen Red front fender Stock seat Buell Race seat Brand new Vance and Hines Carbon fiber exhaust Used unknown (Borla?) carbon fiber exhaust Stock red fuel tank Black fuel tank Bike stand American Sport Bike billet shifter American Sport Bike billet rear brake lever 2 Flywheels, one drilled with lots of holes Extra rear bracket with custom LED tail light Box of parts to complete and some spare parts The bike is in Charleston South Carolina and will need to be picked up. There are so many loose parts that it can’t really be shipped. I do not want to part this out. I want it to go to someone who wants to finish the project and enjoy it. I will probably keep it before I part it out. Please email me if you have any questions or need any additional pictures.                | ||
| Sdecp |
Dang it! If I could buy the bike and hide it, I would do it. If my wife found out I bought another tuber, she would put it where the sun does not shine. | ||
| Oysterman |
Aaaargh!!!! If only you were closer.... Wonder how much it would cost to get it to Washington state?? | ||
| Joel |
Interested, PM sent. | ||
| Hughlysses |
Joel- sorry to see you're having to sell your baby. It's been a few years since I saw it, but that's gonna be a sweet bike when someone finishes putting it together. | ||
| Sleez |
man, i want that CF tail section!! good luck with the sale. | ||
| Guell |
Hmmm, let me think it over, I'm local and could pick it up. I'll shoot you a pm | ||
| Reepicheep |
If I was local that'd be in my garage already.... | ||
| Prior |
I sent a PM as well, not quite as local, but would love to have this in the stable as a project... | ||
| S1joel |
Thanks for all the response. It appears to be sold at this point with two waiting in line behind the buyer. | ||
| Jay_sun_star |
3rd in line? cash here! have trailer, will travel | ||
| Nallac |
love the look of the drilled rear pulley,it sure does change the look of it...... | ||
| S1joel |
The bike is no longer for sale. Thanks for all the interest. | ||
| Hughlysses |
Great! Now go out to the garage and finish putting all the trick parts on it and RIDE!  | ||
| Jacrex1 |
it looks really great ! you have done alot of good work on it ! glad it worked out for you ! | ||
| Foximus |
Damn... | ||
| M24et |
I need an S1 tank. Would you be interested in selling one of them? If so, then how much? |
