G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Griffo Posted on Wednesday, February 02, 2011 - 08:17 am:        }Hi just looking for a custom cut seat for my M2 if anyone has one , that is an M2 seat im not shortening the tail or anything , if so can you respond with a pic and a price either on the thread or pm .cheers Griffo.   Maxbuell Posted on Tuesday, February 08, 2011 - 05:30 am:        I have a M2 low seat very good shape nicer cut that stock seat in my opionion. $75 ?   Griffo Posted on Wednesday, February 09, 2011 - 04:38 am:        Id be interested Max but I dont think ive seen the low seats , you wouldnt have a pic at all , and also where are you situated , I just need to factor in some postage but im definitely interested .   Griffo Posted on Monday, February 28, 2011 - 08:51 am:        Bump , No one with a custom or S1 seat , id be interested also in an early model M2 seat and tailpiece or an S1 seat and tailpiece , probably restricted to within australia as ive had a few offers from o/s but the postage is like 180bux.   Brinnutz Posted on Monday, February 28, 2011 - 03:19 pm:        FYI, An S1 tail and seat will not fit on an M2. Well, it will, but you need to cut off the M2 rear frame, and weld up an S1 rear frame.   Midnight_rider Posted on Monday, February 28, 2011 - 07:29 pm:        baldwin saddles can take yours and make whatever you want http://www.motorbikesaddles.com   Griffo Posted on Monday, February 28, 2011 - 09:40 pm:        Yep thanks guy , I realise that the S1 wont fit on without a tail chop thats ultimately what im looking at one of the guys here in Aus on badweb Mick has done one and put a step by step on our website about it , I just cant afford the whole thing at the moment ive seen S1 seats and tailpieces but there in the states and they want 200+ for the seat and fairing then its close to that to ship it all here so a bit expensive , I just thought if I could get a low seat or maybe something off the earlier M2's which had a skinnier seat and rear end I might be able to customise something up myself , the problem with my M2 seat and tailpiece is its so wide its hard to even get the seat cut to look sportier . Thanks also for the Baldwin suggestion MR but once again its that shipping costs to and from the states thats the killer. (Message edited by Griffo on February 28, 2011)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: