| Author | Message | ||
     Cvc |
Any body do a big bore 9 or 12 I would to make 1/2 an xb9 out of my blast whats out there? looking for stock xb cam and front head then xb9 piston | ||
| Fusa21 |
I've got a used XB9 Front Head. No springs/valves/keepers on it now, but I have some used stuff I can put together if you want it. It Needs a Valve guide replaced and fresh valve job. What's it worth to you? They go for over $300 new complete. | ||
| Cvc |
PM sent | ||
| Queenofspeed |
XB cams will not work in your blast. Blasts use the same cams as Sportsters or 2003 and under Buells. You just use # 1 and 2 and line them up on the V marks. You also will need a custom billet front motor mount to use an XB head on a Blast and will have to devise something for the rear part of the head to attach to the torsion bar. (Message edited by queenofspeed on August 24, 2010) |
