| Author | Message | ||
     Bomber |
Aftermarket Blast Seat -- Corbin, or . . . . .? edited by bomber on May 12, 2004 | ||
| Spinzealot |
Does anyone have a belt guide to match up with a polished aluminum swingarm? Swingarm is for 99 S2. Thanks! | ||
| Buelliedan |
What exactly do you mean by belt guide? | ||
| Josh_ |
what exactly do you mean by 99 S2? | ||
| Tod662 |
needed air cleaner support for 96S1 i think all tubers are the same this is the piece that goes between the air cleaner and carb and the breather fittings bolt through | ||
| Stevew |
All, I'm looking for the bracket for the front eyelet of the rear shock. I need the one for a 15" shock, so it should be 2002 models (M2 or S1) or later. Thanks | ||
| Spinzealot |
Better way to describe. I was told these were called belt guides. Better description = rear wheel tensioners, the blocks that attach to the axle to adjust belt tightness. Also, it was a 99 M2, sorry for my typo there. Thanks for any help! | ||
| M2fortom |
In dire need of a clutch lever. An incident in the parking lot at work yesterday has left me without one. Lets just say I need to adjust my handlebars to avoid pressing the brake lever up against the new fairing when making a tight left turn. If anyone has a spare laying around it would be greatly appreciated. | ||
| Rammons |
Looking for a rear fender elimination kit for an '02 X1. Anybody have one in decent shape at a resonable cost? Thanks, Bob edited by rammons on May 13, 2004 | ||
| M2fortom |
Clutch lever found thanks to Dave @ HD of Appleton. | ||
| Jinx |
Hi! my bike is almost complete ..but i still missing a couple of bracket for fairing windscreen . the bike is an S1 . i got the brackets for headlamp but i still missing the small support for the windscreen. if any of you has the pieces ...let me know . i need also footpegs .. | ||
| Lornce |
Looking for a clutch lever and turn signal for an S2. No, I didn't do it.  A pair of take-offs (signals and levers) would be great if you've got 'em. thanks in advance, Lornce | ||
| Jbennett |
Does anyone have stock handlebars for a 97/98 Cyclone? If so, let me know??? jbennett2@peoplepc.com | ||
| Englishman119 |
Im in need of another stock, un-modified, XB9 air-box top for the Velocity Stack Challange. Anyone got one they dont need any more after fitting the 12 lid please contact me at mark@ramraceco.com Thanks 119 | ||
| Loki |
Jbenn, got the echo, sent mail back to you with info | ||
| Charlieboy6649 |
Hey all, I NEED a left handlebar control group for an XB9R. That's the proper name... In other words the black box on the left bar that has the signal, high beam, and horn controls. Thanks. Please E-mail me if you've got one at dinect@yuma.usmc.mil | ||
| Jespo_m2 |
Needed: Front brake rotor for 97 S1 Lightning. I'm sure others will work. Let me know. jeremy.esposito@fastsearch.com | ||
| Bear |
Anyone have any motors for sale? | ||
| Tripp |
any1 wanna sell an s1 tail section? | ||
| Greg_s1wl |
WTB: twintail for S1WL. I need at least the body panel and subframe. Color and condition negotiable. |
