Author |
Message |
U4euh
| Posted on Monday, August 02, 2010 - 08:38 pm: |
|
1st is a tail piece from a 03-04 regular XBS model, should fit other years except for the Ss, but I could be wrong on that!
Next is a XB9 muffler, it only had 500 miles when taken off, the rust you can see is only surface rust from sitting in the building for the last 3 years:
And then the XB9 header, I started to polish and just never got around to finishing due to putting a 12 motor in. The entire unit has been roughed with a course wire wheel, then started on with a fine wheel. A little bit of elbow work with some fine steel wool or something of that nature would result in shiny headers:
Howabout 40 for the tail piece, 75 for the muffler, and 100 for the headers? Plus S&H Lemme kNow forgot to add that the powder coating on the tail piece, right above the tail light will probably need to be sanded and repainted, if you get really close you can see what looks like spider webbed cracks. BUT if your going to do a CHOP TAIL conversion, it wont matter! (Message edited by u4euh on August 02, 2010) |
1324
| Posted on Monday, August 02, 2010 - 09:00 pm: |
|
I'll take the tail piece. PM payment information. |
U4euh
| Posted on Monday, August 02, 2010 - 09:30 pm: |
|
replied |
U4euh
| Posted on Wednesday, August 04, 2010 - 08:51 pm: |
|
Havnt heard back from 1324. everything still for sale |
Blasterd
| Posted on Wednesday, August 04, 2010 - 09:42 pm: |
|
Wish the muffler was for a 12... |
Odie
| Posted on Wednesday, August 04, 2010 - 10:33 pm: |
|
I'll take the Grater whenever you decide it's been too long for 1324...... |
1324
| Posted on Wednesday, August 04, 2010 - 11:32 pm: |
|
Jim, Sorry for the delay; work has been eating my soul this week and I forgot about this. Paypal sent for the tail. |
U4euh
| Posted on Thursday, August 05, 2010 - 02:45 pm: |
|
1324, all good payment received, shipping friday morn. |
U4euh
| Posted on Monday, August 09, 2010 - 07:43 pm: |
|
bump |
1324
| Posted on Monday, August 09, 2010 - 07:46 pm: |
|
Got the tail today, thanks! |
U4euh
| Posted on Monday, August 09, 2010 - 08:27 pm: |
|
Hey Nick, didn't ask but do you need the aluminum insert ( cheese grater) I seen it sitting on the shelf this morning! |
1324
| Posted on Monday, August 09, 2010 - 08:53 pm: |
|
Nah, I'm good. This is for a project chop as of now... Thanks anyway, though! |
|