| Author | Message | ||
     Jonsbuell |
Wanted corbin seat for 2000 M2 Cyclone new or like new ...Thanx J.B.  | ||
| Mbsween |
Wanted 2001 X1 shock, one that doesn't leak that is  | ||
| Charlieboy6649 |
A.P.B. (All Points Bulletin) Keep on the lookout for a fairing support bracket. Suspect is found on the 9R front end and is made of magnesium. There is no release date from the factory for this part and my bike has already waited a month! If you have, or know someone who has this part, I'll pay retail + shipping. Thanks. | ||
| Josh_ |
wanted: stock header for 98 S1WL/S3 (ie over frame 2.5" collector) | ||
| Nascar_tom |
X Man We have an oil tank for a 2001 X1. I believe it is the same one. Let us know if you still need one. Be Safe | ||
| Soundman |
Hey gang, I want to put my piece of, I mean, 99X-1 back together but I fubarred some parts. I need; Left Air scoop! Right "Air box" cover. I still have the pan. Would also need the mounting clips as well if available. Modest scratches are OK. Thanks for any help, Soundman in Memphis | ||
| Hunter |
Hi all. I'm looking for a used front fairing for an X-1. It was originally made by Odyssey Kolors and was marketed under the name XTreme. Please be in good condition with all parts included. Thanks for any help. Jesse | ||
| Jasons1 |
I'm looking for the chrome shifter for my '96 S1. The bike went down last night on the left side, and believe it or not, that was the only casualty. Not even a scratch anywhere else on the bike. This is the curved, L-shaped chrome piece that the footpeg and shift likage bolt to that pivots around the footpeg mount. I do not know if any of the newer S3, M2 or X1 shifters will bolt up to my S1, but if you know that they will and want to get rid of one cheap, let me know. Thanks. - Jason | ||
| Soundman |
Jason, I still have the one I pulled off my 99 x-1. It appears to be the correct one. I can check on it next Wed. night. I am in Montreal at the moment. Later Soundman........ | ||
| Smokey |
Looking for aftermarket stainless steel kickstand for S-1, anyone with info please advise. Thanks Smoke | ||
| Josh_ |
Jason, I have one off my 99 S3 if you still need one (see the parts for sale page) | ||
| Lornce |
Wanted: A Buell buddy needs a mechanical speedometer that'll work on '98 S1W. Reply to exactmoulds@sympatico.ca best, Lornce | ||
| Loki |
Before I have to hit the dealer(s)...... NEED: front rotor FOR: 97 S1 -either a good stock early one without the the carrier -or post 2k rotor and carrier | ||
| Libnosis |
I need a used oil bag for my 98 S1. I guess the back tire rubbed a hole in the newest one. Thanks. | ||
| Josh_ |
I retract my call for a stock header for an S1WL. One just went on eBay for $188 which is about $133 more than I thought it was worth. I guess I'll leave mine loud and obnoxious and sell the stock muffler later. | ||
| Tripp |
looking for small 1 person tail section(s1?) for my 99 cyclone never have passengers and i like the look that bads1 etc. got using this combo. paint color or condition doesn't matter as i will be painting the whole bike this summer. oh, and the seat that goes with it! | ||
| Awprior |
Still looking for an manta ray M2 tank in decent condition. Blue is preferred, but any color works. Alex | ||
| Jerry_haughton |
Alex, drop me an e-mail with your needs re: tank; i just replaced the one on the Thong... FB | ||
| Buelliedan |
Does anybody have a buell throttle tube laying around that they aren't using? I sure could use one for my track bike.  ddunn@satx.rr.com | ||
| Road_thing |
Dan: 1" or 7/8" ? r-t |
