| Author |
Message |
    
Knickers
| | Posted on Monday, December 28, 2009 - 09:00 am: | 
|
It's the factory programmable ecm kit that comes with the link cable and software. It can be tuned to work with just about any type of Buell engine build. It can be set up to work with a quick shifter as well.
|
Gearheaderiko
| | Posted on Saturday, January 02, 2010 - 12:46 am: |
|
Stock cams still available? |
Knickers
| | Posted on Tuesday, January 05, 2010 - 07:55 pm: |
|
Yes, stock cams still available. Let me know if you're interested. |
Gearheaderiko
| | Posted on Tuesday, January 05, 2010 - 09:33 pm: |
|
Actually, I dont need them, but I knew a bunch of folks who did. I'm sending out 'feelers'.  |
Knickers
| | Posted on Saturday, January 09, 2010 - 12:47 pm: |
|
Primary is sold.
Still available are....
Stock cylinders $100
Stock XB9 Pistons $50
Stock Cams $100
Thrtl body $40
Alternator & starter $50 each
coils $25 (each)
clutch $100
stock ecm $25
race ecm $450 |
Knickers
| | Posted on Monday, January 11, 2010 - 12:50 pm: |
|
Clutch and throttle body are sold.
Still available...
Stock cylinders $75
Stock XB9 Pistons $50
Stock Cams $100
Alternator & starter $50 each
coils $25 (each)
stock ecm $25
race ecm $450 |
Knickers
| | Posted on Sunday, January 24, 2010 - 12:42 pm: |
|
bump |
Methed
| | Posted on Monday, January 25, 2010 - 06:31 pm: |
|
Thanks again for the primary--looking forward to the 12 swap.
Bump for some good gear. |
Knickers
| | Posted on Friday, February 12, 2010 - 12:27 pm: |
|
TTT
Still available...
Stock cylinders $75
Stock XB9 Pistons $50
Stock Cams $100
Alternator & starter $50 each
coils $25 (each)
stock ecm $25
race ecm $450 |
