| Author | Message | ||
     Guell |
I have a set of tuber crossroads cars. The previous owner of the bars tipped her m2 over and put a slight bend in one bar, not the plate. Everything is in pretty good condition, theres marks from where stuff was bolted up but overall i would say they are good.     | ||
| Guell |
bump | ||
| Guell |
bump, someones gotta want these, i ran them for a while and they worked fine, just too hard on my wrists. | ||
| Ratbuell |
Can't tell from the photos...are they zero degree, or 7 degree down? If they're zero's...I might be interested just to have a spare plate for my S1W. | ||
| Guell |
Joe, I think they are 7 degrees, they were super agressive and all bolted together, they wont sit flat on pavement. | ||
| Guell |
Bump | ||
| Buffalobab |
do you have any pictures of them on the bike? will they fit an s1? | ||
| Brinnutz |
This is what my 7 degree down bars look like on mine while riding (on the left):  Sitting still:  |
