| Author | Message | ||
     Jstfkndi |
I have a small collection of XB parts from a front end fire damage. Some of the parts have NOT been affected, some part have SLIGHTLY been affected and others have the structure, but may need a rebuild ex.(melted plastic on throttle body) They are as follows: Primary cover (missing cap for transmission lube fill) Clutch basket and primary chain, stator cover Oil pump Rocker boxes and covers (a little black, but no structural damage) Push rod covers Rear brake caliper Belt tensioner Swing arm ( some rashing from the road, but structurally sound) Engine cases (with transmission) Cams A few other misc. pieces. I wanted to post a picture, but it is too big, so if you have interest in any of these parts, please let me know and I can send them to a personal email. Hope there is something someone can use! Thanks! Oh, and I am open to offers. Some I will sell stupid cheap and others still are in good shape! (Message edited by jstfkndi on August 13, 2009) | ||
| 12rrrrrr |
hi Jstfkndi - is that a free spirits belt tensioner ? would be interested if it is cheers aks | ||
| 12rrrrrr |
Email sent in reply Jstfkndi AKS | ||
| Yui |
Don't suppose you have that magnesium front fairing bracket still, or that you would be willing to part with it? | ||
| Jstfkndi |
Sorry no front bracket. I wish I could load the picture, so everyone could see what I have! Anyone know how to shrink the photo? I tried, but to no avail! | ||
| Froggy |
http://www.fookes.com/ezthumbs/ | ||
| Rah7777777 |
Do you have the pivot bolt that holds the clutch lever in? If so how fast can you ship it out? Take paypal? | ||
| Jstfkndi |
Sorry, no front end stuff. The only thing I have from the front of the section is the pivot bolt for the steering. Froggy, thanks for the link! I will have to download it at home. Work computers don't let me install!  | ||
| Augustus74 |
Keeping the heads? | ||
| Jstfkndi |
I have a sale pending on the heads. just took a good look at the parts and the exhaust is scrap. I still have the rocker boxes and covers if you're interested. | ||
| Jstfkndi |
 | ||
| Jstfkndi |
   I also have case halves on the motor with the transmission still functional that I may post soon. Not sure if it is something i can part with just yet. Will know in a few days. Oh, and the cylinders are pending sale right now! (Message edited by jstfkndi on August 04, 2009) | ||
| Jstfkndi |
Bumping because of photos. Quite proud of myself for finally getting them up and thanks again Froggy!! | ||
| Tf1182 |
Is the tensioner still available? | ||
| Augustus74 |
Let me know if the heads fall through, looking to get ALL the top end stuff to make a Sportster I have a 1200. | ||
| Ozbourne |
would like to know if you have the oil cooler and lines to go with the oil pump and a price for all | ||
| Jstfkndi |
TF1182- the tensioner is still available $20+shipping if you are still interested. Those are just grease prints in the photo, not fire damage  Augustus74- I will let you know. Ozbourne- I have the cooler and the plastic cover is slightly damaged (I'll take a better photo for you), but no cooling line. | ||
| Jstfkndi |
Ozbourne, I sent you a pm because I forgot to answer your other questions. | ||
| Odie |
What do you want for the primary cover? Any damage to it? | ||
| Jstfkndi |
Odie, pm sent. | ||
| Puddlepirate |
Any chance you have the three oil lines from the swingarm? | ||
| Medic352 |
What do you want for the primary drive and the oil pump? | ||
| Jstfkndi |
Puddlepirate: sorry, no lines. Medic352: I'll take $200 for it + shipping. The primary stuff is in really good shape and the pump spins a little hard, but might just need oil to run through it. Also, I will be selling the engine case halves with tranny and I have cams and a few other components, so more pictures coming soon if anyone is interested. | ||
| Jstfkndi |
Bump! | ||
| Jstfkndi |
Got engine case halves (with tranny, works fine) and cams. Anybody need anything like this stuff? I swear, I'll sell it the chopper guys!! Nobody move or these parts will meet their demise in the hands of a Mutant frame! You hear me?!! Ahhhhh!! | ||
| Robertoxb9 |
Hi Jstfkndi< Do you still have the throttlebody, and what happened with it, regarding your first post? Could you PM with price, or e-mail with picture? Thanks | ||
| Jstfkndi |
The metal is fine and it could probably be rebuilt (will need rebuilding). I kept it just in case it could be used again, I will get some more photos tonight up of the rest of the stuff as well and the throttle body. | ||
| Jstfkndi |
What the deuce?! I put up pics and now they are gone! Reposting:     | ||
| Jstfkndi |
      | ||
| Loose1 |
What do you want for whats left of the motor and the throttle body, and shipping to 56301? Thanks Matt |
