Author |
Message |
Phelan
| Posted on Saturday, July 04, 2009 - 12:32 am: |
|
Looking for a set of these. |
Guell
| Posted on Saturday, July 04, 2009 - 08:46 am: |
|
Have you tried al? I had a set but no longer have them |
Brinnutz
| Posted on Saturday, July 04, 2009 - 11:34 am: |
|
Call Hal's...I hear they might have some. |
Court
| Posted on Saturday, July 04, 2009 - 03:54 pm: |
|
Gads. . .any Buell dealer or American Sport Bike should have them. |
Guell
| Posted on Saturday, July 04, 2009 - 10:06 pm: |
|
Court, buell has spacers to run the xb wheel on a tuber swingarm? They were not stock sized, i know that. |
Court
| Posted on Saturday, July 04, 2009 - 11:41 pm: |
|
I misunderstood. Buell does not make them. That's sure something I'd want to take a close look at before doing. Perhaps you could run a rear. |
Ratbuell
| Posted on Sunday, July 05, 2009 - 12:27 am: |
|
Email Jody, he's posted in Old School quite a bit. He has an S1/S3/XB hybrid that's gorgeous....I'm sure he can let you in on the sizing if he had to make his own...or his source if he bought 'em. |
Phelan
| Posted on Sunday, July 05, 2009 - 04:21 am: |
|
I know American Sport Bike did or still does have them; I was just curious if anyone had some off-hand. |
Guell
| Posted on Sunday, July 05, 2009 - 10:25 am: |
|
Nope, mine went to another person who was doing the build. Jodie is running a xb swingarm on his tuber so im not sure if he would have measurments or not. |
Phelan
| Posted on Sunday, July 05, 2009 - 11:18 am: |
|
I'm just tryin' to be cheap . If I dont find the spacerd I may just bore out some axle sliders and run the XB axle. |
Puddlepirate
| Posted on Tuesday, July 07, 2009 - 06:53 am: |
|
I've got a set. PM Sent. |