| Author | Message | ||
     Delta_one |
I have a pair of 7 degree bars for an xb9s that came extra with the bike I recently purchased,(it has clubman bars on it now so the 7 degree bars are superfluous) I don't know how long they were used but they still look great. I would like to get a fair out of them after shipping but make me an offer... I also have a new set of traction hand grips to go with the bars if interested. I need a new shift fork and am selling to help pay for the repair. I will post pics as soon as possible until then http://www.americansportbike.com/shoponline/ccp0-p rodshow/A9074.html (Message edited by Delta_one on June 19, 2009) | ||
| Delta_one |
picture as promised You will need to get hardware to install them. American Sport bike has it on their site.  | ||
| Gambit |
how much are you asking for the bars + grips? | ||
| Delta_one |
I only know that the grips were $16 new, but I hear mixed things about the bars cost so make me an offer. Please note before you offer that two screws, one on each side, are stuck in the milled top plate. I am willing to bet a pair of vice grips will get them out. It's seems that it had come with aluminium hardware and the heads broke off when the previous owner removed the bars. (Message edited by Delta_one on June 19, 2009) | ||
| Delta_one |
166 to your CONUS door step. No grips. 178 with grips. | ||
| Jeffroj |
Can you post a close up of the bolts? Thanks. | ||
| Delta_one |
This is the left side top and bottom. The right is exactly the same. Only the two outer most bolts that hold the bars are stuck; one on each side.   (Message edited by delta_one on June 24, 2009) |
