G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Michael1 Posted on Thursday, April 23, 2009 - 01:06 pm:        I picked these up hoping to install them in my 2006 Uly. I didn't. New these are around $140. I was told the range of spring rate is higher than the stock 07 and up stock Uly springs. The stock progressive spring rate is a .7kg/mm to 1.04 kg/mm. For my type of riding style a set of straight rates is best. The part number is DX03 and SAE 10 wt Oil is recommended with them. Wilbers also states that these will work with 07 and up Uly's as well. These are not the lowering Wilbers springs. Standard height. http://www.motorcycle-suspension.com/listen_usa/ga belfedern.pdf The bad: They do have some surface rust, but can be cleaned up with some emory cloth. I purchased these used and they sat, hence the surface rust. I quickly wiped some of the rust off with my finger. If I get some time, I'll clean 'em up, but not guarenteed I will. Pics are available, if needed. Wife has BOTH camera's. Asking $75 shipped to the Continental USA.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: