| Author | Message | ||
     Wardan123 |
I, like many people, have been affected by the current economic downturn and must sell my bike and all of the parts I have stockpiled for its repair. I am going to ask what I think are fair prices, charge actual shipping, and not negotiate. I will respect inqueries as they are posted here- (first posted- first dibs). If you think my prices are too high, I appreciate your opinion but I will not budge on prices. I will ship internationally if needed- and will again charge actual shipping. If the parts dont sell here by midnight Tuesday March 31st EST, I will list them on ebay Wed. April 1st. Here is the list: Buell Race Air Cleaner Kit - SOLD   Jaz Catch Can - SOLD  X1 Headlight - $75  M2 Headlight (Plug in cut off and trim ring "custom painted" flat black) -$45  X1 Speedo/Tach/Dash (12,700 miles reflected) SOLD  Chinese carbonfiber-like tank fillers THESE ARE NOT THE HIGH QUALITY ONES FROM American Sport Bike (holes are not dead on- looks good on though) SOLD}}  Bronze gear for oil pump- New never installed- SOLD}}  Updated shifter - (used) SOLD  1999 X1 tank cover (rattle can painted HD Orange) SOLD  X1 Oil bag SOLD  X1 tailight SOLD  Turn signal cluster $15  Starter/Kill button cluster/Thottle SOLD   Updated "Y" exhaust hangar SOLD  Front motor mount and heim joints SOLD  Throttle body filter and injectors SOLD  2 sets of X1 passenger pegs SOLD  Brake resivoir/cable/rear master cylinder }}SOLD  X1 wiring harness (does not appear to have been cut $25  X1 Airbox/with 2 stock filters SOLD   X1 air scoop SOLD  Assorted Buell fasteners and parts SOLD  (Message edited by wardan123 on March 26, 2009) (Message edited by wardan123 on March 26, 2009) (Message edited by wardan123 on March 27, 2009) | ||
| Jramsey |
I'll take the passenger pegs,mastercyl.throttle body and assorted fasteners. Send me a PM with shipping and addy. Add the throttle assy. and bronze gear as well. (Message edited by jramsey on March 25, 2009) (Message edited by jramsey on March 25, 2009) | ||
| F_skinner |
I will take the race air cleaner. Will have to get back to you at lunch time. Frank | ||
| Jmkybf |
Dibs on Exhaust hanger and shifter (Message edited by jmkybf on March 25, 2009) | ||
| Mm128 |
Wardan, I NEED/WANT the JAZZ Catch Can... Let me know through PM where to send $ Thanks Matt | ||
| Benm2 |
I'll take the dash. I'll contact via PM for your paypal addy. Ben | ||
| Pontlee77 |
if Matt doesn't take the catch can I will. | ||
| Rotzaruck |
Hate to see you having to do this, but..... I believe I can use that assorted pile of stuff. I lose little things all the time. Send me a total and how to get it to you. Rotzaruck! | ||
| Brinnutz |
PM'ed on Taillight, and both switch assemblies. | ||
| Jramsey |
Nutz, I already spoke for the throttle assy. Beat U to it for a change  | ||
| Brinnutz |
LOL, I didn't see you posted that. Sorry, I read through your post, missed it. And DOH! I guess I'll just get two new ones! But I still want the Taillight. I have a plan to make an LED taillight without having to cut the harness! X1 and M2 harnesses are the same for the tail light I hope! | ||
| Hippyjoe |
I'll take the oil tank and the Y-hanger if the other guy backs out. | ||
| Thejuicer |
2nd in line for the bronze gear and shifter assy...thanks. | ||
| Tommytubetone |
2nd for the shift assembly if TheJuicer passes on it. | ||
| Big_koch |
Looks like I'm a little too late here. Don't wanna step on any toes, but if nobody has spoken for/ decides they don't want the fuel tank trim ring/ rubber skirt/ breather I could use it. | ||
| Snp304 |
2nd in line for the race air cleaner... | ||
| Fixer |
I would like to put in line for the shifter, and the assorted fasteners. Thanks | ||
| Harleygold |
I'll take the tank if not spoken for yet, can pass rubber tank trim to Big koch if thats all he needs. | ||
| Limitedx1 |
pm sent | ||
| Gulbrane |
I'll take the carbonfiber tank fillers, shipping to zip 55433 - PM sent (Message edited by gulbrane on March 26, 2009) | ||
| Wardan123 |
Gulbrane- LimitedX1 has committed to buy the tank fillers- you are next in line. Andrew (Message edited by wardan123 on March 26, 2009) | ||
| Reducati |
will either the headlights you have fit an s1? thanks | ||
| Bbbob |
Andrew, pm sent, re: airbox & airscoop... | ||
| Dave_02_1200 |
I'll take the front motor mount and heim joints. | ||
| Wardan123 |
Redducati- I believe either one will- if they do not you could use a spacer (i.e. a washer) to make them fit. Or tell be the dimensions of an S1 headlight and I'll measure them for you. Andrew | ||
| Reducati |
bikes at shop getting a new mastercylinder...anyone know if the headlights are the same mounts? s1 for x1 or m2? thanks | ||
| Wardan123 |
If I recall the forks are the same for the X1 and the S1. If you buy the one for the X1 and it doesn't fit- send it back for a refund. Andrew | ||
| Crazyman54783 |
PM YOU I NEED THE AIRBOX!!! MY WIFE DUMPED MY BIKE LAST WEEKEND!!  | ||
| Wardan123 |
Crazyman- Bbob has committed to buy it- you are second in line. Andrew | ||
| Jramsey |
Anybody heard from Andrew? I got a PM from him on the 26th wanting a zip for shipping which I sent back but haven't heard anything since. |
