| Author | Message | ||
     Not_purple_s2 |
I got these for my Buell but they weren't exactly what I wanted. They require 1.5"+ of additional rise to clear the triple tree. I used a 1" Precision Engineering riser with 3/4" steel spacers. I'd suggest getting the 2" PreEng risers. Diameter: 7/8" Width: 28" Rise: 0.8" Pull: 6" center: 4.8" Bars are chrome and there's only a couple of light scuffs from test fitting them on my bike. They are where the controls mount so you won't see them when the bars are mounted. 9.5 out of 10 How about $20?     (Message edited by not_purple_s2 on March 03, 2009) | ||
| Jacrex1 |
nice look ! | ||
| Not_purple_s2 |
They look good, but they're super aggressive. I ordered a different set which should be less extreme. In the mean time I'm running a set of "euro" bars. | ||
| Kilroy |
I'd love those but I can tell that after about 30 min you would have to pry me and my bad back off the seat | ||
| Not_purple_s2 |
Bars are sold | ||
| Billetmetallic |
Begin Hijack (sorry notpurp)... ... I have a set of these if someone else would like a set, $20 plus shipping |
