| Author | Message | ||
     Bartimus |
Like it says, looking for a tail light assembly for a '95 S2. Not sure if one from an S3 will fit or not. I need the whole assembly, not just the red lense... Bart | ||
| 1313 |
I might have a backing plate, but probably no red lens. FYI- Same taillight for the following Buell's: RR 1000 RR 1200 RS 1200 RSS 1200 S2 S3 Thanks go to Moto Guzzi for the unmodified part:   Let me know if you can make due with just the base (basically everything but the red lens and 2 screws), 1313 (Message edited by 1313 on February 27, 2009) (Message edited by 1313 on February 27, 2009) | ||
| Bartimus |
I can use the backing plate, but will still need the lens. Is that an S2 lens on that guzzi? Nice fit! Let me know what you need for that backing plate. my zip is 85308. Bart | ||
| Ratbuell |
The S2 light *is* a Guzzi light. Kinda like the rest of the tubers share a light with a Duc. I'll check when I get to work, but I want to say they're still available new and not that expensive. | ||
| Ratbuell |
The lens is no longer available seperately, but the whole light assembly is readily available. $53.50 retail, Y0401.2QQ. S3 tail light assembly supercedes to the same part number. (Message edited by ratbuell on March 01, 2009) | ||
| Bartimus |
Thanks Joe! the info is much appreciated! Bart | ||
| Ratbuell |
 |
