| Author | Message | ||
     Jetrider802 |
All necessary parts to put together a bike, minus the motor and carburetor. Converting this bike for street use requires, lights, wiring harness (basically full electrical system).       Includes: >Front fork >Race Tech valving & shim set up for Buells (unsure of current spring setting) >2000 Yamaha R6/R1 brake calipers >Braketech brake rotors >Braided steel lines >Marvic Mag Wheels, cush drive in the rear >Spondon swing arm >Chain conversion >Airtech tail section >Narrow fuel tank off early cyclone >Chassis brace >Rebuilt PENSKE shock >2-3 Sprockets Needs: >Clip-ons >Motor >Carb | ||
| Buellsrule |
How much? | ||
| Beachbuell |
Are you looking to sell the whole lot together or will you break it up? I'm interested in the WP front forks! (Message edited by beachbuell on November 17, 2008) | ||
| Thunderduc |
How much for the whole set up Rob? | ||
| Malott442 |
I'm local, how much........ | ||
| Jetrider802 |
At this point in time we want to sell everything together. We are looking for $3000 or best offer. | ||
| Jetrider802 |
This bike is still available if anyone is interested! This bike might have been forgotten seeing as it made its way to the bottom of the classifieds list. | ||
| Reducati |
if you decide to sell it piece meal, im interested in the front rotor | ||
| Hippyjoe |
Put me in line for the rear shock if you part it. | ||
| 13was13 |
If sold in parts I would be interested in the tank, the tail section, the front fender and the swingarm. | ||
| Jstfrfun |
This thing has been in here too long to sell as a bike Robert, time to go for a part-out or assemble for sale in one piece. my .02 If it were me, it would go back together and get lots of photo play, promote the hell out of it on all venues for top dollar! | ||
| Dammitquikgentry |
I like the wheels put me in line if you part please! | ||
| Guell |
If you part it out, im very interested in teh swingarm | ||
| Jetrider802 |
If anyone you are interested in any parts on this bike call 860.884.5818 or email me jetjohnson@verizon.net and I can get you a price. Thanks Robert | ||
| Guell |
Email sent on the swingarm | ||
| Hippyjoe |
...and on the rear shock. | ||
| Jstfrfun |
When you get done selling pieces, let me know what you've got left in hardware( nuts, bolts, ect.) I'll help you clean up. | ||
| Jetrider802 |
All remaining Parts will be listed in the parts section tonight, with prices. Parts are sold on a first come first serve basis. Thanks Robert | ||
| Jetrider802 |
Pricing >Front fork with Race Tech valving & shim (unsure of current spring setting) $300 >Triple Clamps $50 >Braketech brake rotors (almost Brand New) $ 100 Each >Marvic Mag Wheels, cush drive in the rear, cost new 2400 selling for $800 wheels have less than 500 miles on them and are in perfect condition >Ti rear Rotor $50 >Spondon swing arm: Cost 1200+ new. $600 >Airtech tail section $100 >Narrow fuel tank off early cyclone $200 >Chassis brace $50 >Storz steering dampener with brackets $50 If I did not list something that you may be interested call or email me. Every thing is sold first come fist serve Robert | ||
| Buellsrule |
pictures please for the storz steering damper. thanks. | ||
| Buellsrule |
I'm also interested in the shock. | ||
| Jetrider802 |
Damper and Brace Sold Robert | ||
| Jetrider802 |
Shock Sold | ||
| 80rs427 |
I'll take both of the the braketech front rotors. Email sent.... | ||
| Hippyjoe |
Thanks Robert for the quick turnaround on the shock, looks real good. Good luck selling the rest of the parts-- | ||
| 13was13 |
Is there anything left? |
