Author |
Message |
Pkforbes87
| Posted on Monday, June 23, 2008 - 10:57 pm: |
|
Make an offer on any or all of it: Vance & Hines SS2R exhaust - missing the E in Hines and some cosmetic damage on the bottom from scraping a couple curbs Rear hugger Stock ECM "horseshoe" shift linkage and the 2 bolts that go through the chin fairing into the primary cover 1 set of plug wires stock breather bolts 2 stock turn signals - both have good bulbs but one is missing the plastic lens (SOLD) stock brake lever stock clutch lever lower belt guard right side airbox internal piece and air filter - DOES NOT include the "T" connector or breather hoses rear fender and trunk tray - includes brake light and license plate light right and left side airbox covers - includes ALL pieces and hardware, a K&N filter, and an air temp sensor right and left stock mirrors - left mirror is cracked so if you only want the right side I'll throw the left away and save shipping (Message edited by pkforbes87 on June 25, 2008) |
Pkforbes87
| Posted on Monday, June 23, 2008 - 11:44 pm: |
|
|
Pkforbes87
| Posted on Monday, June 23, 2008 - 11:46 pm: |
|
|
Pkforbes87
| Posted on Monday, June 23, 2008 - 11:47 pm: |
|
|
Pkforbes87
| Posted on Monday, June 23, 2008 - 11:49 pm: |
|
(Message edited by pkforbes87 on June 26, 2008) |
Pkforbes87
| Posted on Monday, June 23, 2008 - 11:51 pm: |
|
(Message edited by pkforbes87 on June 26, 2008) |
Pkforbes87
| Posted on Tuesday, June 24, 2008 - 12:03 am: |
|
|
Puddlepirate
| Posted on Tuesday, June 24, 2008 - 06:42 am: |
|
How much for the breather bolts shipped to 04106? |
Pkforbes87
| Posted on Tuesday, June 24, 2008 - 12:47 pm: |
|
@ Puddlepirate - PM sent |
Impala
| Posted on Tuesday, June 24, 2008 - 06:14 pm: |
|
I am interested in the stock brake lever and one of the sets of plug wires. Do you accept Paypal? Thanks |
Pkforbes87
| Posted on Wednesday, June 25, 2008 - 12:15 am: |
|
Yes, I accept and prefer paypal. |
Cheddarheads4erik
| Posted on Sunday, June 29, 2008 - 08:37 pm: |
|
Interested in linkage and hugger. Will they fit an '01 S3T? I have no idea what this stuff goes for so PM me a ballpark $$ figure. |
Littlebuggles
| Posted on Monday, June 30, 2008 - 03:51 am: |
|
That linkage sure looks like a stock boomerang turned upside down, if it was mounted like that I'd be amazed that it wasn't touching the ground... Cheddarhead, stock huggers are the same on all 99+ tube framed Buells, should fit yours just fine. -Mike |
Pkforbes87
| Posted on Monday, June 30, 2008 - 09:37 am: |
|
Littlebuggles is right, the linkage is a stock "boomerang", "horseshoe", I've heard it called many different names.. I didn't realize I had the picture upside down when I posted. |
Dyerschaos
| Posted on Monday, June 30, 2008 - 11:44 am: |
|
i have a buddy that needs the brake light will you sell it separately? how much shipped to 95959. thanks |
Jramsey
| Posted on Monday, June 30, 2008 - 02:14 pm: |
|
I'm interested in the clutch lever,the left side scoop, right side bread box and the trunk if the bike they came off hadn't been dropped. Shipped to 66741. |
Pkforbes87
| Posted on Tuesday, July 01, 2008 - 10:06 am: |
|
@ Dyerschaos & Jramsey - sent you both a PM. I'm leaving for homecoming in a few hours so won't be able to ship anything until I get back. My email account may get full and delete some PMs that are sent while I'm gone, so if I don't respond please shoot me a message again in a week or so. |
Pkforbes87
| Posted on Tuesday, July 08, 2008 - 12:41 pm: |
|
Rear Hugger and Shift Linkage are SOLD! "Sorry, but the message you were attempting to edit was posted more than 20160 minutes ago. You are not permitted to edit messages more than 20160 minutes old." ^ wtf ^ |
Jramsey
| Posted on Tuesday, July 08, 2008 - 01:08 pm: |
|
I'm still interested in the clutch lever,trunk, left side scoop and the outside air cleaner cover. |
Jramsey
| Posted on Wednesday, July 09, 2008 - 04:17 pm: |
|
I want the 60078-99Y trunk only, don't need the tag bracket. M1667.K Left air scoop. 29241-99Y Air cleaner cover. 45187-96Y Clutch lever. Would be nice also if you had the plastic washers and the Torx screws for the scoop and cover, but no biggie if you don't. I'm located 66741 about 300 miles straight south of you. |
Pkforbes87
| Posted on Wednesday, July 09, 2008 - 06:15 pm: |
|
Thanks Jramsey.. PM sent. |
Cbiv
| Posted on Thursday, July 10, 2008 - 10:27 am: |
|
How much for, "right side airbox internal piece and air filter". Will pay w/paypal Thanx |
Cbiv
| Posted on Thursday, July 10, 2008 - 10:30 am: |
|
If you've still got it, the Vance and Hines pipe as well. |
Pkforbes87
| Posted on Thursday, July 10, 2008 - 10:57 am: |
|
@ Cbiv - PM sent |
Jramsey
| Posted on Thursday, July 10, 2008 - 05:16 pm: |
|
Phillip,money's on the way. |
Pkforbes87
| Posted on Wednesday, July 16, 2008 - 12:37 pm: |
|
@ James, Nikita, and Roy - your parts all shipped Tuesday night via USPS. Sorry I didn't make it by Monday night as promised. My roommate had a little issue with tread separation on her Durango so I stopped to help and was too late to the post office. Let me know when your shipments arrive, and hope you enjoy! |
Kalali
| Posted on Tuesday, July 29, 2008 - 10:38 am: |
|
Can the rear fender and belt cover be bought together separately from the other rear end stuff, e.g., tray, license plate holder, etc? If so, how much? Thanks. |
Jeffb
| Posted on Tuesday, July 29, 2008 - 11:18 am: |
|
I am interested in the rear tail light. How much? Email me at baileyj76@hotmail.com Thanks, Jeff |
Jaws2422
| Posted on Wednesday, July 30, 2008 - 01:39 am: |
|
IM interested in the V&H exhaust if you still have it. Shoot me a price! Go easy on my pocket book! I just bought my first Buell so my ends are running a little thin. I think the bike is awsome but it is way to quiet for my taste. |
Bald_bueller
| Posted on Saturday, September 20, 2008 - 08:49 pm: |
|
i am interested in the v&h if you still have it....bought a shite one off ebay and looking for a good one |
Pkforbes87
| Posted on Saturday, September 20, 2008 - 10:18 pm: |
|
bald bueller - PM sent |
Preybird1
| Posted on Saturday, October 04, 2008 - 10:17 am: |
|
Still have the shifter relocator? How much if you do. (Message edited by preybird1 on October 04, 2008) |