| Author | Message | ||
     Onahog |
Stock 1997-98 S3 seat....Minty.. Will fit 1997-2002 S3 & S3T as well as S1 with 2 up rear fender. $50.00 plus shipping. Onahog hankb@mts.net | ||
| Ratbuell |
Hank - you sure about the S3 / S1 twintail crossover? I have an S1 twin setup and that seat is s-k-i-n-n-y. Like, take the solo S1 tampon, add half a tampon behind it, and there you go. I did finally open the S2 seat box though  Looks great, not nearly as comfy as the Corbin...I may have a buddy of mine reshape it as a biig flat solo, like the XB12STT, so I can tuck my lanky ass down behind the windshield without feeling like I'm "on the passenger seat". Or I may just leave it alone. It's on the wall at the moment, with the pulley cover you sent...the supertrapp I just took off...and the worn out front rotor and carrier I took off. Lotsa crap on the walls! | ||
| Nocompromise |
I agree about the twin tail not being compatible. I have a S1 twin tail, and it doesn't look anything like the S3 seat - it's MUCH skinnier. I've never heard of people putting a S3 tail on a S1, but maybe someone has? | ||
| Onahog |
Hey..Im not sure...I just got a Corbin seat for the S3T, and on the bottom of it says S3/S1 Gun fighter and lady...I also went to corbins web site and it says this there too. Was there some other kind of 2 up tail section for an S1? One never knows what corbin may have built. Hb.. |
