| Author | Message | ||
     Dnchevyman |
i have no spark on my x1, ive replaced the coil and pickup and tested all the wires. but nothings fixing it. the only thing i can think of now is the computer. so if anyone has an ecm for a 99 x1 i could really use one! this bike is my means of transportation. i dont care if its a race ecm or stock. i just need something. | ||
| Vortec57 |
HA, you're screwed!! No, really, help this guy out, he rides the freakin wheels off that bike. | ||
| Dnchevyman |
hahahaha!!! vortec that made me laugh. thanks again for shacking me up overnight. i had a blast. and to think, the bike made a 2600 mile round trip but once i got back to vegas, it didnt make it 10 miles.....go figure... | ||
| Epmchow |
I have a stock ECM out of a 2000. Will that work for you? | ||
| Dnchevyman |
i think it should. anyone else that can confirm if it will work or not? | ||
| Ratbuell |
99 / 00 have different part numbers, sorry. 99 PN is 31652-99Y, supersedes to N0306.KA. HD Baton Rouge (LA) shows one in stock. List is $280, their numbers are P-225-292-9632 F-225-292-9634 Otherwise it's available Vendor Direct, 10 days, order at your local dealer. Hope it helps! | ||
| Dnchevyman |
so this one wont work then?? dangit | ||
| Dnchevyman |
now, as long as its out of a 99 x1 it will work??? what about the race ecms??? what one do i need? | ||
| Dnchevyman |
is there a range of years that will fit my bike? or does it have to be from a 99 x1? i saw a race ecm on ebay that said the applications were.... Part Number Z1037.K This race module provides an advance curve that allows the engine to rev up tp 6800 RPM. Module designed to work with other race system components to achieve improved torque and horspower. Fits '99-later X1 and S3/S3T models. will this work??????? | ||
| Ratbuell |
Race ECMs should work fine. I don't know if there were actual software changes from 99 to 00 in the stock ECMs or what. I don't know if it will "work" or not...all I know is the parts book lists a different part number. Part numbers could change for any number of reasons - different software, different connector pinouts, different mounting holes, or different suppliers. Unfortunately, I ride carbureted tubers and don't have much knowledge about the tuber ECMs...sorry. | ||
| Firemanjim |
Call Al at American Sport Bike,he probably knows. What does the race ecm fitment say? | ||
| Fingali |
i have a ecm for a 1999 s3t, on my old bike they found a bad ground and it was the problem. find out if that stock ecm will work | ||
| Wile_ecoyote |
Have you got straightened out with ecm? I might have my stocker off 2002 X1. | ||
| Dnchevyman |
got an ecm. didnt fix the problem...uggghhhh |
