| Author | Message | ||
     Jagpor |
6 inch extended swingarm for a tube Buell. Was tig welded in fixture for accuracy. Stock wheel and brakes still work. $120.00 plus shipping. I am in Oklahoma 73003 and can take paypal. jagpor@hotmail.com for more info. Pics below | ||
| Jagpor |
 | ||
| Jagpor |
 | ||
| Phat_j |
no offense, but i think it will bend... needs support.... | ||
| Interest |
/\ Regarding the bending concern, Have you ever seen an SV swingarm? Looks fairly similar to me. | ||
| Jagpor |
Yes, it still needs plating/bracing for extreme use usually done at the same time wheelie bar mounts are added if being used for racing but the critical alignment part has already been done. | ||
| Puddlepirate |
Several guys on the Sportster forum have done the same type of mod to extend their swingarm, and haven't had a problem with not having it braced. I don't know what the stress difference from bike to bike would be, but the XL is a bit heavier. | ||
| Phat_j |
swingarm walls are atleast twice as thick on a sportster swingarm.... i'll measure tomorrow when i get to the shop to get an exact difference... |
