| Author | Message | ||
     Jackelfox |
I dont have 'em yet. Comming on a bike i bought for my wife, but almost certain i wont want 'em. $237 on ebay? happily send them to the lower 48 for $175 delivered. (need enough money out of them to replace and get back the hardware they replaced) | ||
| 98s1lightning |
pics | ||
| Jackelfox |
oh of course... never been able to post pics well here maybe ill link http://cgi.ebay.com/ebaymotors/NEW-Custom-BUELL-XB -Lightning-Performance-Handlebars_W0QQitemZ1201182 95038QQihZ002QQcategoryZ35557QQrdZ1QQcmdZViewItem this is NOT my auction, just an example | ||
| Winchcable |
Do you know if they are the 0 degree or the -7 degree bend? When are you getting them? I am looking for a set so if 98s1lightning doesn't want them I will take them. (Message edited by winchcable on May 12, 2007) | ||
| Hardcorps |
If they are 0 degree, and either of the two in front of me due not take them, I will. I will also send you my stock handle bar setup. | ||
| 98s1lightning |
All I need to know is will they fit an S1? | ||
| Jackelfox |
i *should* have the bike thursday | ||
| Winchcable |
I'm going to make a guess that they will not fit an S1 based on different part numbers for the different models. So if 98s1lightning is out just let me know what you decide to do with them. Thanks (Message edited by winchcable on May 14, 2007) | ||
| Xwraithx |
i'll take them for 175, lemme know when you get them! cash in hand!!! c.heim@mac.com | ||
| Hardcorps |
Jackelfox, Sent you a couple emails, just curious if you got them? | ||
| Jackelfox |
i thought i responded to all the emails. sorry if i havent. I bough the bike from dallas and it still hasnt arrived Sorry guys i guess putting this up ended up being a bit premature. But seriously i plan on selling them, just as soon as i can friggen get the bike. | ||
| Hardcorps |
Jackelfox, Just curious if you received the bike and bars yet? Shoot me an email when your ready to sell them. | ||
| Jackelfox |
i will, thanks. i still havent recieved the bike. | ||
| Jackelfox |
Alright folks i FINALLY have this bike and the bars, cant remove them till i get a bracket to hold on the other handlebars. I cannot say with a hundred percent which bars they are. i would guess they are the 0', just the lack of clarity here gives me guess that is likely not a significant difference between the two. Now the kicker, the bars are great, scratch on the right side, but i believe could be rotated to point down. anyhow i have run into some unexpected expenses with this bike do i need all the help i can get. enough people have emailed and pmed and posted i dont know who responded first. So its high price takes em. Lemme know. ill pay shipping. | ||
| Hardcorps |
PM sent | ||
| Jackelfox |
everyone else no longer interested? | ||
| Dyerschaos |
so is this gone to silent bidding? where do we go from here? | ||
| Brentmiller |
jackelfox, Did you find any stock bars? I have a bar from an 00 M2 that I have no use for. Let me know if you need them. Brent | ||
| Jackelfox |
i have stock bars. Purchased them in advance. Thanks for the offer though Brent. Dyers, essentially yes. Though it wasnt intended on going this way i felt it was the only way to make sure they got to who really wanted them. I am not really concerned about the price as could be seen from the first post. But if its worth it to someone to take them at 190 over 175 then i personally think its fair to give them the opprotunity. Currently if i dont hear otherwise someone wants them for 175 shipping included. Anyone that wants them more than that lemme know. | ||
| Jackelfox |
Ok i have everything for the new/old bars to be put on, so its last call for these bars! | ||
| Hardcorps |
Jackelfox, The only reason I sent that email is there is no indication that any one else put in a "BID" on these bars. Hey if some one else bid please post up so we can keep it fair. I said I would pay the original plus $10 dollars if I was out bid. I in no way was trying to start an argument just want to keep an even playing field. |
