| Author | Message | ||
     Malott442 |
X1Rear swingarm, hayabusa rim, front sprocket and spacer fits the X1 and ???? Condition 7/10 Rear swinarm has slight damage from buell sprocket bolts snapping out, has been machined to fit hayabusa axle, the brake mount, the offset spacer, the sprockets (24/40) are all there and this kit is believe it or not BOLT IN, with a required lowering of the rear. I ALSO can supply the lowering bracket, which is hand built out of 1/4" steel. I am also willing to polish the swing arm, remove the hugger and gaurd bolts, if desired. Give me an idea and I will give you a price. NO I am not a frickn' dealer! I am a hardcore rider and love fabricating. I am moving on to a single side swingarm. Once done, will be trying to sell those as well, but I guarantee, it will be welding required. *NOTE. lowering is not required on this setup if you get an aftermarket sprocket (48T) which provides a very slight overdrive.40T BRINGS 3RD TO 5TH IN RATIO, IT SEEMS. Not for someone who cruises less than 80, so 48T is recommended. I used 40 because I am crazy. | ||
| Ripcord |
Is this a 17" rim and how wide is it? I am looking for a 6"or larger to go on a 96 Lighting 88" motor. I want to run a 210 tire. I have a milling machine to modify my swing arm if I need to. I am new to the Buell game but have been building bike for thirty years.Any help is appreciate. Ripcord |
