G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Hallfleming Posted on Saturday, October 18, 2014 - 04:00 pm:        Looking for the following: Stock exhaust Standard height seat (i've got a low profile) Front blinkers Shifter peg that threads on the shift arm Thanks for looking! Located in Georgia   Marksblast Posted on Sunday, October 19, 2014 - 12:39 am:        I have a Stock Exhaust. 1000 miles used. From my 2009 Blast. And a low seat, brand new. I use the higher one. It is not that much higher... Also have a left signal. It works, just the outer plastic piece cracked. HD should still have some down south. I am in Vancouver, canada. So you'd have to pay some freight. About 20 lbs worth. Let me know if your interested?   Brag918 Posted on Saturday, December 06, 2014 - 09:16 pm:        I have both a stock seat and a stock muffler. Seat as new, located near Chicago, IL   Kenny_gilgore Posted on Saturday, December 06, 2014 - 11:19 pm:        Hall, I have a standard height seat that is 95% and the pin and locknut that latches to the latch on the frame is installed. I don't think that you can buy the shifter peg separately. I bored and tapped mine for a Heli-Coil to use a stock Sportster shifter peg. I am in North Texas 76207. Kenny G   Vicenzajay Posted on Sunday, December 07, 2014 - 02:09 pm:        Here's where you can get the peg by itself....give these folks a call or email. Oh - eliminate all spaces in the link below and then copy/paste into your browser. For some reason, Badweb isn't allowing this to be posted as a link in any format at all. Really annoying - so I had to put spaces in the address to get it to appear at all. www. buellparts. net/content-product_info/product_id-3006/session-f 9a8372694f94d35f5349a17508bf428/blast_shifter_peg. html   Gearheaderiko Posted on Tuesday, December 09, 2014 - 12:23 pm:        You used to be able to buy the shifter peg separately. It has its own part number and by design it's obviously meant to bend before doing damage. Why they kept the part number so secret is beyond me, but it was sold as a "kit" with instructions!   Vicenzajay Posted on Tuesday, December 09, 2014 - 06:42 pm:        The peg is still available by itself - in stock at the link I posted above. Give them a call - they'll fix you up (even if it is pretty expensive for just a peg!)   Hallfleming Posted on Friday, January 02, 2015 - 06:47 pm:        Thanks to all who replied. I didn't see the replies until now. I thought I had email alerts turned on. My apologies!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: