G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Nico Posted on Friday, July 26, 2013 - 10:00 am:        My '07 Blast has an interesting issue. Starts and runs just fine, but after a half hour or so, the neutral light starts to flicker then goes out. Still runs and shifts fine. Can still shift into gear and into neutral, just no light. If the bike is shut off and it sits for a while, the light comes back when turned on. But then it starts to happen again. Bad bulb? Some type of sensor shorting out? Thoughts?   Gearheaderiko Posted on Friday, July 26, 2013 - 06:23 pm:        My guess is the sensor is loose or going bad. An internal trans problem is possible (shifter), but its not at the top of my list.   Ezblast Posted on Saturday, July 27, 2013 - 02:03 am:        Tighten sensor. EZ   Vicenzajay Posted on Wednesday, August 14, 2013 - 02:24 pm:        Starting to happen to me as well - but after an hour or so of riding for me. How do I tighten the sensor - where is the sensor? thanks, Jay (Message edited by vicenzajay on August 14, 2013)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: