| Author | Message | ||
     Havina |
My blast isn't starting like it should, it sounds like its not getting enough power when I try starting. Could this be related to overtightening the primary chain, though it still sounded like it wasn't getting a whole lot of power when the chain was loose. | ||
| Havina |
Just adjusted the idle speed and it starts easier, it also could be that I am starting it like I used to start my dirtbike, opening the throttle while starting it, yeah thats probably it.  | ||
| Ezblast |
Try to use the throttle as little as possible to start bike. EZ | ||
| Havina |
Ok that wasn't the probably I don't think, I noticed the losing power sound was coming from the airbox and opened it and a little smoke was coming out. I put duct tape around the inside circle part so that my k&n filter would fit in, is this the problem? | ||
| Havina |
Also there is backfiring going on in or near the airbox which often causes it to stall out whilst idling. (Message edited by havina on July 14, 2011) | ||
| Ezblast |
Das Boot - replace intake coupler! EZ | ||
| Havina |
Yep, forgot all about that, I ordered two online and they should be in in a few days. That should fix it. Thanks EZ | ||
| Swampy |
clean up the thread, move to diagnosing problems, won't start.......thanks Your Boss! LOL! |
