G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

http://www.badweatherbikers.com/buell/messages/47623/627777.html

Author Message   Gearheaderiko Posted on Wednesday, December 28, 2011 - 12:29 am:        http://www.badweatherbikers.com/buell/messages/201 64/66673.html?1280273823   Roblast Posted on Thursday, August 19, 2010 - 10:52 am:        Anyone know how much the Friction Zone Service Bulletin costs to have done? I do a lot of city riding, and I'm thinking a bigger friction zone would be nice.   Ezblast Posted on Thursday, August 19, 2010 - 01:06 pm:        I figure about 100 bucks if you have the tool, 150 if you don't - lol EZ   Ronbob43 Posted on Wednesday, August 25, 2010 - 08:56 am:        Do it! I think I paid @ $130.00 for the parts and $60.00 for the tool. It may have been cheaper if I had bought the parts from American Sport Bike. I got the tool there. Stop and go works the way it is supposed to now.   Fahren Posted on Wednesday, August 25, 2010 - 09:43 am:        Cross referencing here, from Old School. $5 Home-made spring compressor tool idea: http://www.badweatherbikers.com/buell/messages/476 23/589522.html?1282742114   Ronbob43 Posted on Wednesday, August 25, 2010 - 10:18 am:        Oopsie----that was @130.00 for the whole job, parts and tool. A friend wanted to make the tool for me, but the American Sport Bike tool has fittings for both the Blast and XBs.   Gearheaderiko Posted on Wednesday, August 25, 2010 - 09:26 pm:        Thanks Fahren. That PVC sure is handy stuff!   Sarodude Posted on Tuesday, December 27, 2011 - 04:41 pm:        Uh, what's the "Friction Zone Service Bulletin"? -Saro   Swampy Posted on Tuesday, December 27, 2011 - 04:59 pm:        If you follow the link above it is a modification to the clutch plate stack that will give a smoother engagement to the clutch feel other than the stock on or off feel.   Sarodude Posted on Tuesday, December 27, 2011 - 05:26 pm:        ???? The BadWeB link takes me to a homemade clutch spring compressor thread. The American Sport Bike links go to the front page of their site. I've scanned it 3 times and I don't see anyone talking about the clutch as much as the tool. -Saro   Gearheaderiko Posted on Wednesday, December 28, 2011 - 12:27 am:        http://www.badweatherbikers.com/buell/messages/201 64/66673.html?1280273823 I dont know why its not here or with the other service bulletins,but here it is!   Ezblast Posted on Saturday, October 25, 2014 - 04:48 pm:        http://www.badweatherbikers.com/buell/messages/476 23/627777.html EZ   Kenny_gilgore Posted on Saturday, October 25, 2014 - 05:25 pm:        Erick & Ed I did that bulletin and I am very happy with the results. I used the homemade tool as shown in Ezblast's posting. I tried the other homemade tool and it was too difficult for me to reach the spring clip. The part number for the spring clip is screwed up, and since it is a stock Harley part I wouldn't buy a new one until I was sure I needed it. Take the old one along to the dealer to make sure you get the correct part. Kenny G   Gearheaderiko Posted on Monday, October 27, 2014 - 01:21 pm:        Good job Kenny and thanks!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: