| Author | Message | ||
     Lucas70374 |
I need a favor, can someone please post me a picture of Race Clip ons, I need to put some on cause of the ram air system I have and decided I will be using Woodcraft but would like to see what you guys done with controls and things like that. I have a 2003 XB9R and any advise is appreciated | ||
| Buellnineone |
  | ||
| Mark_1 |
Nice pics!! is that a brembo master? anymore of the bike? | ||
| Lucas70374 |
perfect, thanks you did the cutting of the top clamp yourself, dont seem that complicated to cut. | ||
| Ceejay |
don't run the split or 3 piece clip ons from woodcraft-I made that mistake and while I haven't got to run them yet and they look and feel very nice, but at full lock to lock the mounts will pierce the frame in an accident. I cut my top clamp with a porta band, and then turned it down on the mill. | ||
| Buellnineone |
The stock tree has too much turning radius for clip-on's. The easiest fix is to weld up the stops on the lower tree. This will give you more adjustment of your bars and keep your thumbs from getting smashed ! It might prevent damage described above. This also should be done if you are using the Ohlins under mount steering damper as it has less travel then the stock stops. 91 | ||
| Ceejay |
yep, that's what my solution was going to be, as I wouldn't need that much turning other than in the pits/garage, just haven't gotten to it yet... |
