| Author |
Message |
    
Puzzled
| | Posted on Friday, May 28, 2010 - 07:26 pm: | 
|
Thank you. |
Jrfarrow1987
| | Posted on Friday, May 28, 2010 - 08:30 pm: |
|
mike can u take some measurments for me and send me the specs.... u know im gonna build it just dont wanna start with nothing |
Budgolf
| | Posted on Friday, July 02, 2010 - 06:00 am: |
|
What does one of those swingarms cost? |
Mike1125r
| | Posted on Friday, July 02, 2010 - 07:44 pm: |
|
Email Elton Fish http://www.efrracing.com/ for pricing on 1125r drag race swing arm. You can also call him at the number on his website. |
Puzzled
| | Posted on Thursday, July 29, 2010 - 11:40 pm: |
|
1.44 60' times, holy chit! 
That was a launch to see. Did it pull the tire even with the arm? |
Mike1125r
| | Posted on Sunday, August 01, 2010 - 08:22 pm: |
|
I launch at 9000 rpms. Depending on the track conditions, air pressure, shock adjustment Ive pulled the front end up about 12 oclock. Sometimes I ride a nice small wheelie through first and second or sometimes it comes straight up, pretty wild with the long arm. I launch hard the suspension has to be dialed in just right. |
Puzzled
| | Posted on Sunday, August 29, 2010 - 09:22 pm: |
|
Mike1125r what are you running for gearing?
Those 60's are impressive. I have the speed with turning 138 MPH however I don't have the 60's and ET. |
Mike1125r
| | Posted on Sunday, August 29, 2010 - 10:54 pm: |
|
16t on the transmission and 47t on the rear |
Puzzled
| | Posted on Sunday, August 29, 2010 - 11:44 pm: |
|
Thank you.
That is roughly a 2.93 ratio.
I'm running a 2.80 ratio (Similar to CR gearing).
Maybe I should look into the CR 76 tooth pulley. 76/26=2.92 76/25=3.04
I definitely feel I need to add more gearing to the bike. |
Mike1125r
| | Posted on Monday, August 30, 2010 - 08:25 am: |
|
I highly reccemond you go with the 76t cr gear. Ypu should drop 1-2 tenths easy depending how u ride. |
Puzzled
| | Posted on Monday, August 30, 2010 - 08:54 am: |
|
I looked around on Ebay last night and didn't see one for a CR.
As much as I like my belt and the parts I made for the pulley changes a chain conversion is making more sense all of the time. |
Mike1125r
| | Posted on Monday, August 30, 2010 - 11:10 am: |
|
I'm going to be going to the track every week now. I took a break this month its been too hot. Hopefully run some faster times. |
Budgolf
| | Posted on Tuesday, September 28, 2010 - 10:03 pm: |
|
Where did you get the tunnel ram dude? |
