| Author | Message | ||
     Kalifornia |
sorry but I've looked and couldnt find anything regarding which clutch master cylinder or brake master cylinder(turned upside down) will fit in/on a stock 12R clip on and still clear the fairing stays and instruments etc. ANYONE KNOW??? where I can find out? thanks | ||
| Firstbuell |
Brembo & other Euro suppliers have that item, ever since Wayne Gardner created it mebbe look at a copy of RoadRacing World? | ||
| Fuzzy |
no idea about clearance, but 13mm magura supposed to give excellent feel. check with the stunt guys: http://hoheydesigns.com/archives/category/accessor ies | ||
| Rocketman |
I have the ISR radial master cylinder (front brake) on my S1W. It rotates through 180deg so can be used as a clutch master on the left, or a rear brake if you're doing something else. Comes in two piston sizes too, and it is a quality made piece of kit, and very reasonably priced in the UK market. It can be had with remote reservoir too, which saves a bit of space. http://www.isr-brakes.se/products/mastercylinders/ Rocket | ||
| Buellnineone |
http://www.gptechllc.com/thumbrake.html | ||
| Kalifornia |
thanks, I think Im gonna try a 1125 master, only because it would match. |
