G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Spuh Posted on Sunday, September 24, 2023 - 11:20 pm:        Hi, it's almost time for front brake pads. Lyndall Gold on there now. I see Lyndall now has an "extreme" pad. What brake pads do you prefer?   Pushr0d Posted on Tuesday, September 26, 2023 - 08:35 am:        I've been using EBC HH (sintered metal) pads - I just found out that if you drip fork oil on them, they don't work very well! Who knew!? Unless someone chimes in with another recommendation, I'll probably put a fresh set on when I put the front back together with a new fork seal.   Tootal Posted on Tuesday, September 26, 2023 - 01:35 pm:        Totally agree. I've had really good luck with the EBC's.   Whisperstealth Posted on Tuesday, September 26, 2023 - 03:58 pm:        EBC'S HH all the way when I had my Uly. Can't go wrong with them. ...Unless you drip fork oil on them lol!   Pushr0d Posted on Wednesday, September 27, 2023 - 11:10 am:        Update - I have ordered the seals, bushings and 'stopper rings' from my local HD dealership A PO had apparently decided the rings were not necessary. I'm not sure they are, but figured the designers know more than I do... The items are all available on the HD computer under the Buell part numbers, but they come from a 'Vintage Parts' vendor. The cost is actually better than what I could find elsewhere, especially considering there is no shipping charge. All that being said, they are Showa 43mm USD forks - the parts should be easier to find!   Pushr0d Posted on Wednesday, September 27, 2023 - 11:16 am:        Update - I have ordered the seals, bushings and 'stopper rings' from my local HD dealership A PO had apparently decided the rings were not necessary. I'm not sure they are, but figured the designers know more than I do... The items are all available on the HD computer under the Buell part numbers, but they come from a 'Vintage Parts' vendor. The cost is actually better than what I could find elsewhere, especially considering there is no shipping charge. All that being said, they are Showa 43mm USD forks - the parts should be easier to find!   Pushr0d Posted on Wednesday, September 27, 2023 - 11:16 am:        Update - I have ordered the seals, bushings and 'stopper rings' from my local HD dealership A PO had apparently decided the rings were not necessary. I'm not sure they are, but figured the designers know more than I do... The items are all available on the HD computer under the Buell part numbers, but they come from a 'Vintage Parts' vendor. The cost is actually better than what I could find elsewhere, especially considering there is no shipping charge. All that being said, they are Showa 43mm USD forks - the parts should be easier to find!   Nillaice Posted on Tuesday, October 03, 2023 - 04:58 pm:        yah, no pulsing with sintered pads   Ourdee Posted on Thursday, October 05, 2023 - 10:25 pm:        EBC HH on all my bikes.   Motorfish Posted on Saturday, October 07, 2023 - 11:24 am:        I use EBC HH pads front and rear too. Work great

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: