G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Big, Bad & Dirty (Buell XB12X Ulysses Adventure Board) » Tuner Pro and IDS ECM « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Mark_weiss
Posted on Sunday, November 26, 2017 - 02:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Can I use Tuner Pro to safely write to an IDS ECM? The cold idle is a bit too high and puts the bike right into the zone where the engine mounts seem least effective at isolating vibrations. I read the xpr file with Tuner Pro and found that the cold idle starts at 1750 rpm and gradually declines during warm-up. I'd like to drop the initial idle speed to about 1500 and proportionally taper the warm-up steps but I don't want to brick the ECM.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration