|Posted on Monday, August 28, 2017 - 04:47 pm: ||
Ok, I realize I need to go in by the rear shock but how do I remove this comfort kit covering the shock and fan area? I was reading installation directions for the kit but I'm having a hard time understanding how it's held in. Do I have to remove the entire truck pan, ECM, battery and so on to get to this O2 or is there a way to just lift this plast cover off that's covering the top of the shock?
|Posted on Monday, August 28, 2017 - 09:16 pm: ||
well, if the comfort kit has to come off, then you'd have to take off the seat pan to re-install the comfort kit.
the other option to getting at the O2 sensor is to rotate the engine ... 6 or half dozen, but since you're gonna hafta rip the bike in half, might as well check stuff out while you've got it apart.
is there anything else that needs fixed/replaced inspected ? ... fan, rocker box seals, throttle body, shock preload adjuster re-build?
... big bore kit?
|Posted on Wednesday, August 30, 2017 - 03:34 pm: ||
Oh man!!! You gotta be kidding me!!! I'm ready to relocate the O2 sensor! It would be easier to weld a new bung!